Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 09-28-2015, 06:11 PM   #15
Senior Member
LSC9901's Avatar
Winnebago Owners Club
Ford Super Duty Owner
Join Date: Nov 2010
Posts: 738
In some ways I wish mine was deep enough to close the outside door with the slide shut but I guess I question what the big issue is ? I understand that you MUST remember to open the slide prior to closing the door but I'm pretty much used to it now and it really doesn't bother me. Yes I wish the size I want was easily accessible but I'm not gonna spend and arm and a leg and then have to modify it to make it so I can close the door with the slide closed. Once you decide you want to go back out you need to open the slide again anyway.

Am I missing something ?

If you have friends who make you laugh, spend lots of time with them.
2008 Winnebago Sightseer 30B

LSC9901 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-28-2015, 08:49 PM   #16
Senior Member
Rendon's Avatar
Join Date: Feb 2014
Location: Pass Christian, MS
Posts: 104
Originally Posted by Arch Hoagland View Post
I had a heck of a time getting mine in too. All the mom's in the neighborhood took their kids inside until I got it done.

I like mevman's idea of filing it off a bit.

Pound to fit, paint to match is the old carpenters solution.
Thanks for the tip! I think all my neighbors should go inside also!!!! Lol! I will try pounding it in. I'm just afraid it will break again. The guy that broke it said he would put it on! Ha! He ain't touching another thing in my MH!

Pass Christian, MS Retired
2004 Itasca Sunrise, Full Timer
Rendon is offline   Reply With Quote
Old 09-28-2015, 08:53 PM   #17
Senior Member
Rendon's Avatar
Join Date: Feb 2014
Location: Pass Christian, MS
Posts: 104
Originally Posted by mevman View Post
You'll have to measure the opening, or the old slider and then carefully cut off the excess plastic from either the top or the bottom. I used a heavy tin snips to cut mine.
I ordered mine from Winnebago. It is the exact same size as the old one. It's made of a very hard plastic and I'm not sure about trimming it, afraid it will just crack all over. Why do they make things so difficult!!
Pass Christian, MS Retired
2004 Itasca Sunrise, Full Timer
Rendon is offline   Reply With Quote
Old 09-28-2015, 09:11 PM   #18
thunderjet's Avatar
Join Date: Mar 2013
Location: winter in Fl. 34957 summer Mi.48755
Posts: 55
I just install my new plastic slide door on screen door.
was not bad at all.
removed screen door to make easier to handle.

Removed 4 -1" long screws from edge of door, they hold the upper and lower tracks that the cover slides in. also pulled spline from screen on both top and bottom of non-hinge side of door. I didn't remove spline from very top, very bottom or hinge side. approx. 70% of each spline stays in place. pulled rails just enough to slide in new cover.
reinstall 4 screws and press spline back in place with wide screwdriver. screen is now tighter than before repair.

Total time about 20 minutes using battery drill driving Philips bit.

Good luck
2005 Winnebago Adventurer 35A
Toad 2016 Equinox
W-22 GM 8.1 gas
thunderjet is offline   Reply With Quote
Old 09-29-2015, 08:55 AM   #19
Senior Member
Rendon's Avatar
Join Date: Feb 2014
Location: Pass Christian, MS
Posts: 104
Thanks for the tip. I got it in with a few cuss words and some muscle!!!!!! This forum is so helpful and I thank everyone for your help!
Pass Christian, MS Retired
2004 Itasca Sunrise, Full Timer
Rendon is offline   Reply With Quote
Old 09-29-2015, 09:50 AM   #20
Senior Member
Johndale's Avatar

Winnebago Owners Club
Join Date: Sep 2013
Location: Ft Worth texas
Posts: 820
Originally Posted by Rendon View Post
i also had to order a new slider thanks to someone leaning on it and popped it out and cracked it. So I got the new one just like the one pictured in this thread but I cannot get it installed in the tracks. It will not bend enough to make the top and bottom go in the tracks. Can you please tell me how to get it installed? I tried taking the screws out of the top bar but that was useless.

Thanks, Peggy

You must trim either the top or bottom a little bit. Take a straight edge and using a box knife and score it. Then with a pair of pliers to snap off that area.

Sent from my iPhone using iRV2 - RV Forum
2003 Sightseer 33L
Ford F53
Johndale is offline   Reply With Quote
Old 09-29-2015, 05:53 PM   #21
Senior Member
jeepfreak's Avatar
Join Date: Mar 2003
Location: hanover ma.
Posts: 394
I also went thru every thing and ended up getting a new one from Tiffin. The shipping was almost as much as the slide. Was quite nervous about bending it to install, but turned out ok. Wonder why the size is so odd. How many companies make the screen doors anyway?

2007 Allegro 34wa .WH w20 8.1 6speed. Bow tie powered 79 CJ7 or a 2014 Jeep Unlimited Rubicon Toad.
jeepfreak is offline   Reply With Quote

door, scr, slide

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with screen door to main connection! TrollMeister Outdoors RV Owner's Forum 1 08-08-2015 08:35 AM
Replacement screen for upper screen door crabmaster48 Monaco Owner's Forum 4 05-21-2015 08:44 PM
Broken Screen Door Screen Frame mrbodywork Monaco Owner's Forum 20 04-20-2015 08:43 AM
Screen door Modification doorguy Winnebago Industries Owner's Forum 3 12-02-2014 09:35 AM
Retractable screen for door luckydog1949 Winnebago Industries Owner's Forum 11 02-18-2014 09:27 PM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 01:20 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.