|
10-31-2013, 03:36 PM
|
#1
|
Senior Member
Damon Owners Club Workhorse Chassis Owner
Join Date: Sep 2012
Location: Sacramento, CA
Posts: 1,358
|
Slide Maintenance Thoughts
I got a newsletter from RV123 and one of the articles had a link to Slide Maintenance. In the article it said not to use any powders for the slide seals. I have been using a small amount of baby powder on my seals after reading in several places it is a good practice and so far it does seem to work well for me. I thought it might be a good time to discuss what is best and what works for everyone now that many of us are going to be doing some winter housekeeping to keep our coaches in tip top shape.
Here is the article: Slide Room Maintenance |
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
10-31-2013, 04:37 PM
|
#2
|
Senior Member
Freightliner Owners Club
Join Date: Jan 2013
Location: Spokane, WA
Posts: 698
|
People were using baby powder to keep the seals (inside seal/outside seal) from sticking to each other when the slide was deployed. I don't use it because it was never an issue for me. The silicone treatment sounds like a good idea if your seals are open to the sun. Mine aren't so I leave them alone.
__________________
02 Fleetwood Discovery 37U, 330 Cat pulling a 2006 diesel Liberty..or..2011 4dr Wrangler..or..20' Lund Salmon/Halibut Hunter
|
|
|
10-31-2013, 06:18 PM
|
#3
|
Senior Member
Join Date: Jun 2012
Location: AB
Posts: 7,587
|
Newmar says don't use anything on them.
__________________
2019 Unity LTV CB, pushed by a 2013 Honda CRV, BlueOx Baseplate, Aventa Bar & Patriot Brake
|
|
|
10-31-2013, 06:47 PM
|
#4
|
Senior Member
Damon Owners Club Workhorse Chassis Owner
Join Date: Sep 2012
Location: Sacramento, CA
Posts: 1,358
|
Quote:
Newmar says don't use anything on them.
|
I have read in a bunch of places including this thread that Newmar says to use talc:
http://www.irv2.com/forums/f103/slid...ts-100844.html
|
|
|
10-31-2013, 06:52 PM
|
#5
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,951
|
Quote:
Originally Posted by focker
|
I think the coach mfgr. is more qualified to recommend what to use than any other source.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
10-31-2013, 06:55 PM
|
#6
|
Senior Member
Join Date: Jun 2012
Location: AB
Posts: 7,587
|
Quote:
Originally Posted by focker
|
Hmmmmm, looks like I need to re-read my manual.
__________________
2019 Unity LTV CB, pushed by a 2013 Honda CRV, BlueOx Baseplate, Aventa Bar & Patriot Brake
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|