Slide noise and sticky

[Bob Witt]

2006 Itasca 29' has front slide noise when I put it out or in but only for about 4 or 5 inches of it's travel and always about 2/3 the way out. Tried grease and minor adjustment, didn't work. It has now start to bind a little on the rear motor which does a start stop action for a 1/2 second at a time but only does it 2 or 3 times going in or out. Suggestions

[FreedomDream]

Bring the slide in and hold the button for at least 5 seconds after the slide stops. This might re-sequence the motors. If not, read the owners manual for the reset procedure. Good luck.