Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 08-12-2014, 07:55 PM   #1
Join Date: Jun 2009
Posts: 54
Slide out control

My problem the slide out control module for the bed room slide is giving me trouble, the slide will stop working I have to go in and work the Module around to get it to start again. I have been doing this for awhile would like to replace it just wondering how big a job this is and if any one has done it.

wcombs34 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 08-12-2014, 09:16 PM   #2
Senior Member
terry735001's Avatar
Join Date: Sep 2012
Posts: 1,158
Blog Entries: 11
i have a hand full of the ECMs used to control the motor its self if i have the right unit you can just have one if you want

terry735001 is offline   Reply With Quote
Old 08-13-2014, 02:47 PM   #3
Join Date: Jun 2009
Posts: 54
Originally Posted by terry735001 View Post
i have a hand full of the ECMs used to control the motor its self if i have the right unit you can just have one if you want
I have a o2 Bounder not sure what the part number is, all I know it is small circuit board with a fuse and module on it and a place to plug in wires, also have the same thing for the front slide it works just fine.
wcombs34 is offline   Reply With Quote
Old 08-13-2014, 03:39 PM   #4
Senior Member
waroland's Avatar
Join Date: May 2009
Location: Maryville, TN (Homebase)
Posts: 448
I had a broken solder connection where the power connected to board. I repaired it quickly with a small soldering iron. You might take your board out and give it a check, it was very obvious that the solder joint was broken.
2002 Fleetwood Revolution 38B
2006 Honda CR-V Air Force One
waroland is offline   Reply With Quote

slide, slide out

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynasty Bedroom Slide Life Style Monaco Owner's Forum 19 04-30-2015 05:29 PM
Slide outs need adjusting Alan Wilson Monaco Owner's Forum 14 07-15-2014 05:00 PM
slide out lock bars... worth the effort? Redridge Thor Industries Owner's Forum 3 05-20-2014 05:00 PM
Replacing Carpet Found Slide Problem bgbranch Monaco Owner's Forum 3 02-06-2014 05:57 AM
Living Room Slide adjustment D in Davie Newmar Owner's Forum 1 09-12-2013 08:39 PM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 10:07 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.