|
|
07-20-2015, 04:59 PM
|
#1
|
Senior Member
Join Date: Apr 2014
Posts: 150
|
Slide problem with heavier residential fridg.
Installed samsung rf18 fridg in place of dometic rm1350 and now the slide will barely works with fridg being empty. Any ideas.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
07-20-2015, 05:25 PM
|
#2
|
Senior Member
Join Date: Mar 2010
Location: N. E. Ohio & Lady Lake Fl.
Posts: 1,120
|
Quote:
Originally Posted by BarbandBob
Installed samsung rf18 fridg in place of dometic rm1350 and now the slide will barely works with fridg being empty. Any ideas.
|
I would say you have other problems, as the Samsung actually weighs less that the dometic according to the specs.
__________________
Ron WD8CBT
I started out with nothing and I still have most of it left
|
|
|
07-20-2015, 05:28 PM
|
#3
|
Community Administrator
Join Date: Aug 2009
Posts: 53,561
|
I agree
Quote:
Originally Posted by powderman
I would say you have other problems, as the Samsung actually weighs less that the dometic according to the specs.
|
__________________
Cliff,Tallulah and Buddy ( 1999-2012 )
|
|
|
07-21-2015, 07:55 AM
|
#4
|
Senior Member
Join Date: Apr 2014
Posts: 150
|
The Samsung weight is 225#. What is the Dometic rm1350? Also added 3/4 plywd floor and a few misc pieces.
|
|
|
07-21-2015, 08:33 AM
|
#5
|
Senior Member
Join Date: Apr 2014
Posts: 150
|
Another question- Have 010 Bounder 35h with frig in slide. The slide motor was struggling and just noticed paint is scraped on bottom of slide in frig area. Now with heavier EMPTY
frig the slide barely functions. What is the degree of difficulty in adjusting the slide? Should silicon be sprayed on bottom of slide to reduce friction or will it end up on carpet inside? Should I spray the seals to reduce friction as well and if so with what? Thanks
|
|
|
07-21-2015, 08:35 AM
|
#6
|
Senior Member
Monaco Owners Club Newmar Owners Club
Join Date: Apr 2010
Posts: 207
|
242 lbs according to spec sheets
__________________
2014 Newmar Canyon Star 3650
2011 Ford Fusion Hybrid
Bill & Sue
|
|
|
07-21-2015, 08:44 AM
|
#7
|
Senior Member
Join Date: Sep 2012
Posts: 8,055
|
If you are scraping paint there is an interference problem that has to be fixed.
|
|
|
07-22-2015, 10:09 AM
|
#8
|
Senior Member
Join Date: Apr 2014
Posts: 150
|
actual weight of Dometic RM1350 is 198# vs Samsung f18 @231#. Found on internet.
|
|
|
07-22-2015, 11:30 AM
|
#9
|
Senior Member
Join Date: Nov 2009
Location: Warren, Oregon
Posts: 2,560
|
Quote:
Originally Posted by BarbandBob
actual weight of Dometic RM1350 is 198# vs Samsung f18 @231#. Found on internet.
|
I think you have other problems than a 41# difference in frig. Does your slide run on roller or hard plastic. My table slide is a drop down and has hard plastic at the edge, so when it comes in it has to come up so I spray Teflon Non-Stick Dry film lube spray to help.
2 stroker
__________________
2006 Country Coach Inspire 360 40ft Genoa Designer Series, Samsung 197 RR
Cat C9--STEEL & COPPER Bolt Together Radiator w/ updated rubber mounting
SilverLeaf 330 Magnum 2812 PSW 2011 Ford Edge Sport-Air Force One
|
|
|
07-23-2015, 12:43 PM
|
#10
|
Senior Member
Join Date: Apr 2014
Posts: 150
|
Am not physically able to check. It`s a 010 Bounder 35h with power gear slide mechanism. Will get someone to check.
|
|
|
07-23-2015, 04:08 PM
|
#11
|
Senior Member
Join Date: Apr 2014
Posts: 150
|
What is the product name and where did you buy it? Does it dry quickly? Don`t want it on the carpet. Thanks
|
|
|
07-23-2015, 04:19 PM
|
#12
|
Community Administrator
Join Date: Aug 2009
Posts: 53,561
|
Here is a link to your manual.
http://support.powergearus.com/techdocs/82-S0010-01.pdf
Power Gear doesn't advise lubricating anything but the drive shaft and roller areas ( page 4).
I had the same set up in my 08 35E. Your weight difference shouldn't cause this issue.
Power Gear is very responsive to email inquires. Their address is info@powergearus.com .
Something may have happened during the installation of the new unit.
I hope they can offer some solution.
__________________
Cliff,Tallulah and Buddy ( 1999-2012 )
|
|
|
07-23-2015, 11:16 PM
|
#13
|
Senior Member
Join Date: Nov 2009
Location: Warren, Oregon
Posts: 2,560
|
__________________
2006 Country Coach Inspire 360 40ft Genoa Designer Series, Samsung 197 RR
Cat C9--STEEL & COPPER Bolt Together Radiator w/ updated rubber mounting
SilverLeaf 330 Magnum 2812 PSW 2011 Ford Edge Sport-Air Force One
|
|
|
07-24-2015, 01:12 PM
|
#14
|
Senior Member
Join Date: Apr 2014
Posts: 150
|
Thanks for the info. Do you spray on bottom slide cover? This touches the carpet when slide is in. Worried about ruining the carpet.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|