Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 05-05-2016, 09:52 PM   #1
Junior Member
 
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
Blog Entries: 1
Unhappy Slide won't go out

2012 Itasca Suncrusier 37F, Bed slide will not go out.
__________________

__________________
Denispg is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-05-2016, 09:57 PM   #2
Senior Member
 
Pexring's Avatar
 
Newmar Owners Club
Holiday Rambler Owners Club
Join Date: May 2014
Location: Aberdeen, SD
Posts: 586
Will need a bit more info than that. Is it trying to go out or is there no power?
__________________

__________________
2000 Newmar Dutch Star 38' Class A, Spartan chasis, MM-2242, Cummins 330 pulling a 2014 Ford Focus.
Pexring is offline   Reply With Quote
Old 05-06-2016, 12:31 AM   #3
Junior Member
 
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
Blog Entries: 1
When I press out button nothing happens, no noise. I will check for any input power
__________________
Denispg is offline   Reply With Quote
Old 05-06-2016, 04:49 AM   #4
Senior Member
 
MCJones's Avatar


 
Newmar Owners Club
Join Date: Apr 2014
Location: Western NC -Cherokee area
Posts: 371
The first thing I would check is the black box that controls the slide out. On mine it is under neath in the baggage area. sometimes a plug would get loose.
__________________
Mark
08 Dutch Star 4354, 2017 Wrangler JKU w/rv brake2, blue ox tow bars, Rockhard front bumper with tow fittings.
MCJones is offline   Reply With Quote
Old 05-06-2016, 10:32 AM   #5
Junior Member
 
ODLI BBQ's Avatar
 
Join Date: Apr 2016
Location: East Tennessee
Posts: 15
Do other slides/jacks work? Just had same problem with my slides as well as jacks. Was corroded wire on pump motor. Hope it is something that simple for you. Keith
__________________
2001 Winnebago Adventurer 35u
ODLI BBQ is offline   Reply With Quote
Old 05-06-2016, 02:30 PM   #6
Senior Member
 
530ktm's Avatar
 
Join Date: Dec 2014
Location: Northern Arizona
Posts: 1,391
I wonder if he ever got his slide to go out. The mystery remains.
__________________
2014 Itasca Sunova 33C towing a Jeep JK Wrangler
530ktm is offline   Reply With Quote
Old 05-06-2016, 02:50 PM   #7
Junior Member
 
Digger1944's Avatar
 
Fleetwood Owners Club
Join Date: Jun 2015
Location: St. MO
Posts: 10
Slide Problems

I have a 2014 Thor Windsport on an F-53 chassis. The 2 slides quit working when you push the rocker switches, I do have a wireless remote and the slides worked with that. I have it at the dealer now for repair and they told me the control unit doesn't have power and it's probably a wiring problem. I disagreed with him and suggested that the slides wouldn't work at all if the power isn't there. Waiting to see what he has to say in the next couple of days. I guess if they disagree, I'll have to contact the factory for a resolution.
__________________
Digger1944 is offline   Reply With Quote
Old 05-06-2016, 11:16 PM   #8
Senior Member
 
Pexring's Avatar
 
Newmar Owners Club
Holiday Rambler Owners Club
Join Date: May 2014
Location: Aberdeen, SD
Posts: 586
Quote:
Originally Posted by Digger1944 View Post
I have a 2014 Thor Windsport on an F-53 chassis. The 2 slides quit working when you push the rocker switches, I do have a wireless remote and the slides worked with that. I have it at the dealer now for repair and they told me the control unit doesn't have power and it's probably a wiring problem. I disagreed with him and suggested that the slides wouldn't work at all if the power isn't there. Waiting to see what he has to say in the next couple of days. I guess if they disagree, I'll have to contact the factory for a resolution.
Your problem sounds like a bad rocker switch, but it must not be that simple if the dealer is still scratching his head . . .
__________________
2000 Newmar Dutch Star 38' Class A, Spartan chasis, MM-2242, Cummins 330 pulling a 2014 Ford Focus.
Pexring is offline   Reply With Quote
Old 05-10-2016, 01:03 PM   #9
Member
 
FloridaNative49's Avatar
 
Join Date: Feb 2007
Posts: 48
If your bed is not pulled all the way back (read: tilted up), the slide rocker switches won't engage. There's a sensor there. This is on the passenger side, unaffected by the opposite wall slide.
__________________
FloridaNative49 is offline   Reply With Quote
Old 05-12-2016, 06:18 PM   #10
Junior Member
 
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
Blog Entries: 1
Bed slide won't go out

Disconnected slide motor connection. No voltage to motor. applied 12v to motor directly, slide goes out and in. no voltage at rocker switch . Don't know where voltage comes from to get to rocker?
__________________
Denispg is offline   Reply With Quote
Old 05-12-2016, 06:31 PM   #11
Senior Member
 
Rockwood27's Avatar
 
Winnebago Owners Club
Nor'easters Club
Workhorse Chassis Owner
Join Date: Jun 2012
Location: Freedom, NH
Posts: 949
Is your emergency brake set? You can go to the Winnebago website and download the wiring diagrams for your year and model. From there you can trace the wiring.
__________________
Fran, Mary & Zoey (silver Cocker)
2006 Itasca Sunrise 35A, 2005 W-22, Allison 1000 5 speed
'13 Ford Focus ST or '10 Prius on Master Tow Dolly 80THD-SB or '00 Jeep Cherokee 4-down
Rockwood27 is offline   Reply With Quote
Old 05-13-2016, 11:51 AM   #12
Junior Member
 
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
Blog Entries: 1
Bed slide won't go out

This slide is electric only, no ram, rack and pinion.
Park brake set. I did go to Winnebago site and download wiring diagrams.
I cannot get to the wiring diagram body , got wiring "install body " prints, I will look againfor those diagrams
__________________
Denispg is offline   Reply With Quote
Old 05-13-2016, 03:04 PM   #13
Senior Member
 
Join Date: Apr 2015
Location: Rogers, AR
Posts: 434
I have a 2015 ITASCA 36Y and on the first trip out this Spring, none of the switches would work the slides, Winn. Wireing diagrams are very poor and Winnebago couldn't figure out where the power came from and they put it together. All the slides have their own power source, in my case I hot wired the controllers and ran the slides out. The switches have their own power source from the fuse block by the drivers left foot. Power from the fuse, through the emergency brake switch, through the ignition switch, then one wire to the switches split out to feed all three switches for the slides. Look in the Ford chassis book for the fuse block and there are a few fuse slots listed as "coach builders fuse". That's where I found a bad fuse that killed all the slide switches.
__________________
alank is offline   Reply With Quote
Old 05-14-2016, 12:26 AM   #14
Junior Member
 
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
Blog Entries: 1
Bed slide won't go out

My unit has a sleep number bed that must be deflated and put up before the slide will move. This action depresses a plunger that must be pushed in before the power goes to the slide motor. Phoned Winnebago service, they said that 90 plus percent of slide issues are caused by this plunger not being fully depressed. this was indeed the issue with my unit, slide works fine now. Thanks to all responses I received
__________________

__________________
Denispg is offline   Reply With Quote
Reply

Tags
slide



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slide-out won't slide. jasperb Class A Motorhome Discussions 1 05-02-2015 03:35 PM
Slide out won't slide Johnkmueller Class A Motorhome Discussions 5 08-30-2014 03:02 PM
Slide won't slide out please help Jayrock3570 Class A Motorhome Discussions 3 05-12-2014 08:51 AM
Slide Out won't go out Bondad iRV2.com General Discussion 7 10-09-2012 12:09 PM
'02 Tradewinds slide out won't out Bernadette National RV Owner's Forum 7 02-20-2012 01:54 PM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 04:44 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.