|
05-05-2016, 08:52 PM
|
#1
|
Junior Member
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
|
Slide won't go out
2012 Itasca Suncrusier 37F, Bed slide will not go out.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
05-05-2016, 08:57 PM
|
#2
|
Senior Member
Newmar Owners Club Holiday Rambler Owners Club
Join Date: May 2014
Location: Aberdeen, SD
Posts: 586
|
Will need a bit more info than that. Is it trying to go out or is there no power?
__________________
2000 Newmar Dutch Star 38' Class A, Spartan chasis, MM-2242, Cummins 330 pulling a 2014 Ford Focus.
|
|
|
05-05-2016, 11:31 PM
|
#3
|
Junior Member
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
|
When I press out button nothing happens, no noise. I will check for any input power
|
|
|
05-06-2016, 03:49 AM
|
#4
|
Senior Member
Newmar Owners Club Grand Design Owners Club
Join Date: Apr 2014
Location: Winter-New Port Richey
Posts: 456
|
The first thing I would check is the black box that controls the slide out. On mine it is under neath in the baggage area. sometimes a plug would get loose.
__________________
Mark
2021 Grand Design 395 MS-R / F350 DRW diesel
also -295 RL 34 ft Montana 5th and many more
|
|
|
05-06-2016, 09:32 AM
|
#5
|
Junior Member
Join Date: Apr 2016
Location: East Tennessee
Posts: 15
|
Do other slides/jacks work? Just had same problem with my slides as well as jacks. Was corroded wire on pump motor. Hope it is something that simple for you. Keith
__________________
2001 Winnebago Adventurer 35u
|
|
|
05-06-2016, 01:30 PM
|
#6
|
Senior Member
Join Date: Dec 2014
Location: High up in Arizona
Posts: 2,050
|
I wonder if he ever got his slide to go out. The mystery remains.
__________________
2019 Allegro Bus 37AP towing a Jeep JK Rubicon Wrangler
|
|
|
05-06-2016, 01:50 PM
|
#7
|
Junior Member
Fleetwood Owners Club
Join Date: Jun 2015
Location: St. MO
Posts: 27
|
Slide Problems
I have a 2014 Thor Windsport on an F-53 chassis. The 2 slides quit working when you push the rocker switches, I do have a wireless remote and the slides worked with that. I have it at the dealer now for repair and they told me the control unit doesn't have power and it's probably a wiring problem. I disagreed with him and suggested that the slides wouldn't work at all if the power isn't there. Waiting to see what he has to say in the next couple of days. I guess if they disagree, I'll have to contact the factory for a resolution.
|
|
|
05-06-2016, 10:16 PM
|
#8
|
Senior Member
Newmar Owners Club Holiday Rambler Owners Club
Join Date: May 2014
Location: Aberdeen, SD
Posts: 586
|
Quote:
Originally Posted by Digger1944
I have a 2014 Thor Windsport on an F-53 chassis. The 2 slides quit working when you push the rocker switches, I do have a wireless remote and the slides worked with that. I have it at the dealer now for repair and they told me the control unit doesn't have power and it's probably a wiring problem. I disagreed with him and suggested that the slides wouldn't work at all if the power isn't there. Waiting to see what he has to say in the next couple of days. I guess if they disagree, I'll have to contact the factory for a resolution.
|
Your problem sounds like a bad rocker switch, but it must not be that simple if the dealer is still scratching his head . . .
__________________
2000 Newmar Dutch Star 38' Class A, Spartan chasis, MM-2242, Cummins 330 pulling a 2014 Ford Focus.
|
|
|
05-10-2016, 12:03 PM
|
#9
|
Member
Join Date: Feb 2007
Posts: 76
|
If your bed is not pulled all the way back (read: tilted up), the slide rocker switches won't engage. There's a sensor there. This is on the passenger side, unaffected by the opposite wall slide.
|
|
|
05-12-2016, 05:18 PM
|
#10
|
Junior Member
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
|
Bed slide won't go out
Disconnected slide motor connection. No voltage to motor. applied 12v to motor directly, slide goes out and in. no voltage at rocker switch . Don't know where voltage comes from to get to rocker?
|
|
|
05-12-2016, 05:31 PM
|
#11
|
Senior Member
Winnebago Owners Club Nor'easters Club Workhorse Chassis Owner
Join Date: Jun 2012
Location: Freedom, NH
Posts: 1,520
|
Is your emergency brake set? You can go to the Winnebago website and download the wiring diagrams for your year and model. From there you can trace the wiring.
__________________
Fran, Mary & Zoey (silver Cocker)
2017 Thor Axis 25.5 "RUV", Ford E-450, V10, 6 speed
2016 Chevy Sonic LTZ Auto Hatchback 4-down
|
|
|
05-13-2016, 10:51 AM
|
#12
|
Junior Member
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
|
Bed slide won't go out
This slide is electric only, no ram, rack and pinion.
Park brake set. I did go to Winnebago site and download wiring diagrams.
I cannot get to the wiring diagram body , got wiring "install body " prints, I will look againfor those diagrams
|
|
|
05-13-2016, 02:04 PM
|
#13
|
Senior Member
Join Date: Apr 2015
Location: Rogers, AR
Posts: 2,630
|
I have a 2015 ITASCA 36Y and on the first trip out this Spring, none of the switches would work the slides, Winn. Wireing diagrams are very poor and Winnebago couldn't figure out where the power came from and they put it together. All the slides have their own power source, in my case I hot wired the controllers and ran the slides out. The switches have their own power source from the fuse block by the drivers left foot. Power from the fuse, through the emergency brake switch, through the ignition switch, then one wire to the switches split out to feed all three switches for the slides. Look in the Ford chassis book for the fuse block and there are a few fuse slots listed as "coach builders fuse". That's where I found a bad fuse that killed all the slide switches.
|
|
|
05-13-2016, 11:26 PM
|
#14
|
Junior Member
Join Date: Apr 2013
Location: Edmonton, Alberta
Posts: 13
|
Bed slide won't go out
My unit has a sleep number bed that must be deflated and put up before the slide will move. This action depresses a plunger that must be pushed in before the power goes to the slide motor. Phoned Winnebago service, they said that 90 plus percent of slide issues are caused by this plunger not being fully depressed. this was indeed the issue with my unit, slide works fine now. Thanks to all responses I received
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|