Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 01-19-2013, 11:50 AM   #1
Join Date: Sep 2012
Location: San Mateo,Fl CPO USN Ret.
Posts: 62

I have a2004 Georgie Boy Cruisemaster 3625 DS. When my master slide is fully extended the front rail teeth clear the lower sidewall by 1/4", the rear rail clears about 1". Had same checked advised there was no apparent damaged or broken parts(rollers) alignment appears to be good side to side and up and down. Mech believes it was installed by Georgie Boy that way to keep alignment in place. My concern is if it is dropping down it will catch the lower coach wall and tear it up. Anyone have any similiar problems or fixits?

goffrobert is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-19-2013, 02:07 PM   #2
Community Moderator
"007"'s Avatar

Nor'easters Club
Workhorse Chassis Owner
iRV2 No Limits Club
Join Date: Oct 2004
Posts: 27,814
I guess you can believe the Tech, with your slide in get down close to floor and look under slide floor for roller off holding bracket on one side or that slide floor is straight across with out a bow in a weaken floor base.

98KSCA, 99MACA, 03 KSCA-3740- 8.1 Chev-- ALLISON Trans, now in good hands
"007" is offline   Reply With Quote
Old 01-23-2013, 08:02 AM   #3
Join Date: Sep 2012
Location: San Mateo,Fl CPO USN Ret.
Posts: 62

Thanks for input. Checked all rollers,roller brackets,floor, carpet and side to side adjustment. Nothing appears to be out of norm other than the front ram is very close to basement side wall when fully extended. Any Georgie Boy owners out there with the same complaint or is it normal installation
goffrobert is offline   Reply With Quote
Old 01-23-2013, 09:38 AM   #4
Senior Member
Hooligan's Avatar
Freightliner Owners Club
Join Date: Apr 2002
Location: Pensacola
Posts: 2,298
Probably normal. I have the long single slide. Checked the clearance on my slide rails, about 3/4inch aft and 1/2inch forward. Slide rails are welded to brackets built up on the frame.
Adjustment seems to be at the brackets that hold the room itself and would not affect the rails.
If you have the same slide room, here is the manual.

And if you eventually need parts;
hope this helps..
Hooligan, Pensacola, Fl -U.S. Coast Guard 1956-1985
2016 Thor Siesta Sprinter 24ST diesel
Our Pug "Lily" & "George" the Newfoundland
Hooligan is offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 12:52 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.