Smart Tire problems

[egb243]

A while ago I was messing with my Smart Tire, Tire monitoring system, just trying to get a reading before I was moving fast enough to have all the monitors transmitting. I managed to kill 3 of the 8 tire positions. The tire monitor will no longer read my front two tires and the passenger side inside dully??? I don't know how to re-program it to get those tire positions back.
Does anybody know how to do the reprogram or possibly just re-set the unit???

Thanks for any help you can offer

Gene

[Cruzer]

Call Dickman Tires and ask for Paul. He's the SmarTire expert and I bought all of my SmarTire gear from him. www.dickmantires.com

[clnhse]

Call Paul at Bob Dickman tires…. You will need the programming tool and the ignite tool to fix your problem. I have had smart tire on my last two rv ’s. I have had lots of problems and my best solution is to have four antennas. I do not like the way the sensors are attached to the rim. I just replaced all four on my toad because they broke apart. When it is working it is the best one out there.

[egb243]

I did call Paul at Bob Dickman Tires and he was very helpful. He will rent out the tools to fix my problem and will spend the time to walk me thru the fix. He made mention that Lazy Days may also have the same tools, but that does not seem to be the case, which is a real shame as I'm only about 50 miles from Lazy days right now and will be spending at least two days in their campground next week. --

I want to thank everyone for the good advice and I guess I'll give Paul a call and have him send me the tools when I get back home in a week or so.

again thanks to everyone for the help

Gene