|
|
02-11-2013, 06:26 AM
|
#29
|
Registered User
Monaco Owners Club
Join Date: Oct 2009
Location: Varies Depending on The Weather
Posts: 8,517
|
Quote:
Originally Posted by calvinr
I am in the process of purchasing a monitor for my RV and toad but there are so many choices. Here is a question I hope someone can answer for me. On my toad (Toyota Matrix XR ) there is already a factory TPMS , my question is can I add another sensor to it or do I have to remove the factory first?
|
Is the factory installed TPMS on your toad mounted inside the wheel or on the end of your valve stems? Most factory installed TPMS are inside the wheel allowing you to add another one to the end of the valve stems.
Quote:
Originally Posted by Rvtravelers
Wow I really love this site. I also was researching a tpms system today and came across this thread. I didn't even know they offered a flow through design, what a plus. Thanks to all for making my decision easy.
|
There is a trade off to having flow-through sensors. They are 3-4 times heavier than the cap type sensors. If you are planning to have that much weight running around on your wheel, I would HIGHLY recommend you change out any rubber stems to rigid stems.
Dr4Film ----- Richard
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
02-11-2013, 07:57 AM
|
#30
|
Member
Join Date: Jul 2012
Posts: 75
|
Thanks Dr4, I just checked my tires on my car and nothing looks special about the valve stems, just a solid metal stem , a little wider at the base with a normal screw cap. Does this sound like the sensor is inside?
|
|
|
02-11-2013, 08:12 AM
|
#31
|
Member
Join Date: Jul 2012
Posts: 75
|
Dr4 , I just talked to my Toyota dealer,parts dept. and the guy there said the sensor was built into the stem. He was't sure if adding another one would work or if the two signals would interfere with each other. I guess I will see what the TST people say about it as that is the system I am leaning towards.
|
|
|
02-11-2013, 08:39 AM
|
#32
|
Senior Member
Join Date: May 2012
Posts: 3,816
|
I have no problems with interference on our Grand Cherokee. It has factory tps in the wheel then I added TST 507 non-flow through caps. I've got flow through on the coach.
__________________
2011 MVP Tahoe 230 QB on Ford E350 Chassis
|
|
|
02-11-2013, 09:49 AM
|
#33
|
Member
Join Date: Jul 2012
Posts: 75
|
Thanks John, I just ordered the same as you have. $499 for 6 flow through plus 4 non
|
|
|
02-11-2013, 10:07 AM
|
#34
|
Senior Member
Join Date: Sep 2012
Posts: 1,562
|
IMHO, these TPMS is more trouble than its worth. If the seals fail on these sensor you will lose air pressure. Yes, it will let you know air pressure is low, but now you have to to trouble shoot the tire and the sensor. The valve stem has a mechanical seal on it, and these tpms sensor opens that seal permanently relying on just a rubber seal on the sensor... the track record may be good on these sensor, I dont know. But I live in an area where they use salt to clear the roads... these little seals will not last long given the environment they are in. I would just prefer to check the tire's pressure and/or use an IR gun to check its temperature. This will also let me to go out and physically check the tire out... take the info from these sensors with a grain of salt and check your tires/pressure/temp every chance you get.
I however like the "in tire" sensor, thats a way these TMPS should be than these "screw on" types.... but its very expensive.
|
|
|
02-11-2013, 10:19 AM
|
#35
|
Senior Member
Thor Owners Club Nor'easters Club Mid Atlantic Campers Ford Super Duty Owner
Join Date: Jan 2010
Posts: 2,098
|
I had the TPMS sensors seize on my stems due to galvanic corrosion and had to get them cut off which cost me the price of having all 6 of my 22.5" tires dismounted and remounted.
Never again!!!!!
|
|
|
02-11-2013, 12:21 PM
|
#36
|
Senior Member
Texas Boomers Club Fleetwood Owners Club Solo Rvers Club Freightliner Owners Club
Join Date: Jul 2011
Location: Lakin, Ks.
Posts: 3,636
|
I would never be without my TPMS now that I have it.
The information they provide is invaluable.
The peace of mind of having the system there to alert me is well worth the maintenance on it.
__________________
[SIGPIC][/SIGPIC]Kent: 2015 Fleetwood Bounder 35K
With Ferbie (ShihTzu) Lilly (Pekingese) & Daisy (Yorkie) Memoriam: Katie, Spencer, Zoey, Susie, Angie
|
|
|
02-11-2013, 01:35 PM
|
#37
|
Senior Member
Fleetwood Owners Club
Join Date: Dec 2011
Location: Willow Lakes RV & Golf Resort, FL
Posts: 3,163
|
Quote:
Originally Posted by pagosajoe
X2 here!
|
X-3 here!
__________________
Clay & Pebble
2012 Providence 42 M. Spartan Chassis, 450 ISL
Ford Edge toad, RM All Terrane, TST TPMS, SMI Air Force One, RVM95....
|
|
|
02-11-2013, 01:58 PM
|
#38
|
Senior Member
Fleetwood Owners Club
Join Date: Dec 2011
Location: Willow Lakes RV & Golf Resort, FL
Posts: 3,163
|
Quote:
Originally Posted by DGShaffer
I had the TPMS sensors seize on my stems due to galvanic corrosion and had to get them cut off which cost me the price of having all 6 of my 22.5" tires dismounted and remounted.
Never again!!!!!
|
Thanks Don that is a great tip on the corrosion problem. By that I mean a small bit of anti seize or dialectic grease absolutely would have prevented the corrosion issue. Even though I have chrome brass extenders never hurts to add an ounce of prevention!
__________________
Clay & Pebble
2012 Providence 42 M. Spartan Chassis, 450 ISL
Ford Edge toad, RM All Terrane, TST TPMS, SMI Air Force One, RVM95....
|
|
|
02-11-2013, 02:07 PM
|
#39
|
Registered User
Join Date: Sep 2012
Posts: 602
|
I just ordered a 10 sensor TST TPMS...Even though I will still check tire pressures physically, I like the concept/idea of having that extra measure of safety when I am behind the wheel of my motor home. An ounce of prevention...
|
|
|
02-11-2013, 02:31 PM
|
#40
|
Senior Member
Texas Boomers Club Fleetwood Owners Club Solo Rvers Club Freightliner Owners Club
Join Date: Jul 2011
Location: Lakin, Ks.
Posts: 3,636
|
Quote:
Originally Posted by RVNeophytes2
I was just writing about Daryl & Cheri at Lawrence Electronics Sales on FMCA. They are my top choice.
(Best, the recommended repeater unit is still in the box: for the time being, the unit senses all tires, even those 65 feet away on the toad.)
|
Andy, that looks just like my monitor unit. It is identical except mine says Tireminder....
__________________
[SIGPIC][/SIGPIC]Kent: 2015 Fleetwood Bounder 35K
With Ferbie (ShihTzu) Lilly (Pekingese) & Daisy (Yorkie) Memoriam: Katie, Spencer, Zoey, Susie, Angie
|
|
|
02-11-2013, 03:37 PM
|
#42
|
Senior Member
Monaco Owners Club Texas Boomers Club
Join Date: Jan 2009
Posts: 2,529
|
Quote:
Originally Posted by Redridge
IMHO, these TPMS is more trouble than its worth.
I would just prefer to check the tire's pressure and/or use an IR gun to check its temperature. This will also let me to go out and physically check the tire out...
|
How does one do that at 60 mph out on the Interstate where most failures occur?
__________________
Hal & Ginny Miller '04 Beaver Santiam PRT40
'04 Saturn Vue - US Gear Brake - Blue Ox tow
3"girls" (2 Irish Setters - 1 Retriever) - RIP Annie & Emily (12/26/2017)
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|