I am not an expert by any means but have just had a "Pressure Pro" air pressure montor system on my coach. I am going thur a learning curve adjustiing to the system. Each tire has a sensor screwed onto each valve stem. I am also having installed a "Cross Fire" system on my rear duals which equalizes the pressures on the dual tires. I Also find out that I will have to install a short braded extenion on my tag axle and bolt to the center hub to be able to check pressures manually to check and see if the Press Pro is working properly. Anyone out their have a Cross Fire on your coach and is anyone running a air monitor system on your coach. I would appreciate any feedback on this subject. Thanks Clarence - Houston
PS: I will be running 110 psi front and back.