toilet problem

[hit the road]

Hi guys, this may seem minor, I have a thetford toilet with a lever in the front and the bolts holding the toilet seat, one side is loose, how in the heck do you get in to tighten it?

[szy]

Go to Thetford
look for your toilet

download the schematics ... it will be easy trust me

I have had to work on the toilet on every coach I ever had

[szy]

double post

[Dunner]

szy. Edit - Delete - Click Deleted on left - Click Delete on right. Poof, it's gone.

[ruffian]

I think at the rear of the seat/lid are two plastic holders for the plastic bolts which go thru the porcelain with a plastic nut on the bottom side. The plastic holders have a snap-off cover which covers the head of the plastic bolts.

Snap off the cover and tighten the bolts with a screwdriver.

Hope this does it.

[wa8yxm]

Depending on the model.. ON mine (A 111) there is a decroative collar around the base, it serves no purpose other than to cover the pedistal, it snaps off and finds it's way to a trash bin very easily and makes service much easier.

You can also snap it back on if you wish.

[bobmac]

I just tightened mine and put some double-sided tape between the plastic holders and the porcelain top before tightening. Stays put now.