Tuscany inverter removal problem help

[tacaem]

Hi to all the Tuscany owners out there. I have a 2009 4072 Tuscany and my charger inverter stopped working. I called magnum and was told the AC board is bad so I started to remove the inverter but all four nuts holding the inverter up only comes off to the end of the bolt and stops. The bolt starts turning My question is, is there any Damon owners that has removed their charger and how did you get to the top to hold the bolt from turning I can not see any way to get on top the whole top is enclosed from the under side of the frame.

Thanks to all that can help with this problem

[Mac99]

I can not answer your question, however before you remove it,
you may want to run the attached service flow chart to
see exactly what is going on. Doing so saved me !!

[Outbound]

Maybe it was designed that way, did you look to see if you slide it front or back if there are slots large enough for bolts to drop through.

[tacaem]

thanks for the inputs received i have already done the test and called magnum support and am informed the the AC board is bad just need to get it out to work on it. no slots