Originally Posted by vettenuts
Not sure mine is the same. I have an optical audio out. This is what my user manual states:
Digital Audio (Optical) Connection
Connecting an AV receiver to the TV via a digital audio (optical) connector lets you listen to digital audio.
- Connecting a device using an optical cable does not automatically turn off the TV speakers. To turn off the TV's speakers, set TV Sound Output (Sound > Speaker Settings > TV Sound Output) to something other
- than TV Speaker.
- Adjust the audio device's volume using its remote control.
- An unusual noise coming from the audio device while you are using it may indicate a problem with the audio device itself. If this occurs, ask for assistance from the audio device's manufacturer.
- Digital audio is only available with 5.1-channel broadcasts.
Refer to the diagram and connect the optical cable to the TV's digital audio output connector and the
device's digital audio input connector.
The back of mine is very hard to see, but I did find a photo on line and I "may" have mine plugged in wrong. Will check other output location.
Couldn't you just use the RCA audio out jacks? Or the headphone jack if no RCA audio jacks. I would assume the combo VCR has audio input jacks. Its the way I hooked mine up for 5.1 sound. Worked great.
2005 Newmar Kountry Star Gas 3742
Workhorse W24, 8.1L/Allison 5-spd
JT, Em & the boys, Kong and George (rescued grey tabbies)