Where to get acrylic

[kustom]

we have lights above all overhead cabints the lights have acrylic / plexiglass
lens most are about 3 '' tall and from 36 '' to 60 '' long where can i find a
place to cut me new ones ? old ones are turning yellow and cracking
thanks john
only had old picture from before replacing headlinner

[the_vfox]

What part of the country you are in? It would help to know.

[kustom]

river ranch fl.will be in ga. soon thanks

[the_vfox]

If you have a Menard's down there, they will custom cut sheets for you. But I don't think they have those in the south. One thing you might try is to see if the Home Depot has the material you like and see if they will cut it for you.

The ACE hardware people might be able to help you to order custom cuts if you have a local one also.

[rgvtexan]

Home Depot &or Lowes. You can cut it. Use a sharp razor utility knife, scribe (scratch) a line a few times using a straight edge. Place over a square corner and snap.

[PanJH]

I use this place for my stuff... they have everything in stock and will cut it to whatever size you need. Just right down RT 60 for you

Plastics America


8501 E Adamo Dr, Tampa, FL 33619
(813) 620-3711

[charliej]

If HD or Lowes can't do it I would call a glass shop or two. I believe some handle plexiglass too.

[Playtime III]

Opt for Lexan vice Plexiglass if you are doing the cutting. Much less chance of it shattering vice breaking along the score line.

I made Lexan panels for our prior TT screen door and now the MH screen door. We camp mostly with AC (or Heat) and we can leave the door open and still allow light in.

Bought them at either Lowes or Home Depot and used a circular/jigsaw to cut and a rasp/file to soften the edges.

[kustom]

panjr
that place sounds like just what i need as some pieces need curves cut
thanks john