Originally Posted by chuck49
I'm having a wind noise problem around the entry door. I've had it worked on a couple of times and that helped a lot but it has come back again. I'm thinking about running a thin bead of sylicone around the rubber gasket (which looks fine) and leaving the door open until it drys to see if that will help seal the door when it's closed.
Any ideas or thoughts?
Call the manufacturer of your coach and ask for any documentation they can supply regarding gasket material when new.
I have found that over the years, this material falls off or is discarded by the owner along the way, and they resort to a home made solution. Many times it doesn't work.
After you find out what is supposed to be there for gasket material, rubber moulding, etc., then you can find after-market sources in a lot of places. You'd be surprised once you restore the OEM configuration, it pretty much works.
P.S. don't use silicone. Not designed for motorhomes. There are much better solutions to this problem.
'07 Winnebago Journey 34H - CAT C7, Koni's, MCU's, SS Bell Crank, Safe-T-Plus
'07 HHR Toad, SMI AFO, Blue OX