Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 04-30-2016, 06:58 PM   #1
Senior Member
Bloodyhell's Avatar
Join Date: Jun 2012
Posts: 191
Windshield seal on a 2005 Bounder

The outer rubber windshield seal on our newly acquired 2005 Bounder is not seated well and coming off. The previous owner says he had never had the windshield replaced but he had to take it in to have this seal reattached every couple of years. It looks like I could poke it back in with some black silicon adhesive (or something else?). Fortunately there have been no leaks.

Is this a common problem with these units? Any advice before I dive into this?


Bloodyhell is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-30-2016, 07:50 PM   #2
Senior Member
Fleetwood Owners Club
Join Date: Jun 2011
Location: Mississippi
Posts: 284
Be interested in what you find I have a 2005 expedition that the seal has separated at the top right corner of the wind shield...I think the heat from setting out in the sun caused this..GlenB

GlenB is offline   Reply With Quote
Old 05-02-2016, 01:55 PM   #3
Senior Member
Bloodyhell's Avatar
Join Date: Jun 2012
Posts: 191
Here's what I have learned and where I'm headed. The shop that reseated the rubber seal in the past tells me to use urethane windshield adhesive if I want to do the job myself. I picked some up at a local O'Reilly Automotive, along with a caulking gun, and I'm ready to go. This weekend I plan to remove the rubber strip, clean it off with denatured alcohol and stick it back on with my urethane. We'll see how it goes.

Bloodyhell is offline   Reply With Quote

bounder, seal

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
92 Bounder 31' first timer, cant locate window seal replacement anywhere daytonadale Class A Motorhome Discussions 4 04-05-2015 07:36 AM
Flex Seal vs Leak Seal nmbefgror Gear and Product Discussions 2 06-21-2014 12:14 PM
Driver side windshield 2005-2005 DSDP hwayne Newmar Owner's Forum 2 06-12-2014 08:35 AM
Has anyone tried LeakSeal/Mighty Seal/Seal It/ etc spray sealants? baloo Class A Motorhome Discussions 9 01-31-2013 05:46 PM
Slide Seal Glue and Seal "flipper" LewF Monaco Owner's Forum 6 01-06-2012 08:48 AM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 01:17 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.