For those of you with working Auto Gen Start systems by Xantrex.
Which lights are on all the time on your Controller and Remote modules with the house battery turned on?
I am trying to install a used system on my rig. Xantrex 84-2064.
I have 12.7 dcv into the controller and 9.32 dcv after the first diode in the controller circuit board but nothing lights up on either module.
So I need the above info to recognize when I have partial success in installing the modules.
Yes, I do have the manuals.
No, Xantrex is of little assistance.
Thanks for any help you can provide.