Community Forums

DaveDS4018 · 06-22-2014, 08:10 AM

Yesterday I got an e05 error on my inverter. It worked in the past. I can not get any output when trying to run off the battery. Everything works when running the Generator. It got late so I have not tried to see what happens when the generator in running and I try to turn on the inverter. Looking for any advice or help. Have had the MH for about three months and have not been able to take it anywhere but back and forth to the dealer to fix problems. This is our first MH and hoping for better days then the ones we have been having. OH - It's a 2014 Itasca Suncruiser 37F. Thanks

zeelarry · 06-22-2014, 08:20 AM

I do not know much about your Inverter, but try going to this link, and look at the next to last QUESTION: Frequently Asked Questions (FAQs) - Industrial AC Variable Drives & Inverters | ICED : Hitachi America, Ltd.

Hopefully, someone that know the specifics will come along.

DaveDS4018 · 06-22-2014, 09:41 AM

Thank you for the info. I just tried to plug straight into the inverter and nothing worked. I am new to MHs but will go back and keep looking to see if I can find
anything that does not look right.

ghutch · 06-23-2014, 10:55 AM

If you can plug directly into the inverter, you probably have a GFCI type plug. Check it to see if it has "triped". Reset it, see if it feeds power.

DaveDS4018 · 06-23-2014, 03:53 PM

Ghutch - Tried that yesterday but no output at the inverter. Took it back to dealer this morning and they CK out the inverter and sure enough it is bad. New one on order. As a side note - When I put the slides in last night the full wall slide on the drivers side would not go completely in. Stick out about 2 inches on bottom back corner. They got it back in but will need to order the tracks, motors, and columns to fix the problem. They also noticed two missing side seals from the bedroom slide out that they need to order. The list just keeps growing and we have not been anywhere with the MH yet.

ghutch · 06-24-2014, 03:29 PM

Sorry to hear of your slide problems. The Schwinteck system has had some problems and I would guess that alot of dealers are pretty familiar with them now. Hope your dealer gets it fixed in short order for you. New units will have issues and especially of late as Winnebago is pumping out coaches as fast as they can..... quality seems to suffer a bit. Lets us know how it turns out. Be sure to get any defects fixed by the 1 yr anniversary. WBGO is not flexible on the time. There is lots of info on the Winnebago section of this site.