I purchased my Cabin on wheels last Summer, this is my first "un-winterizing". I'm havin a few issues....
I had the unit winterized at a dealer so I know it was done properly. They told me just to connect to city water and the hot water tank would fill, push out the air and I would be good to go. I did as instructed, but the hot water (I did not turn on the tank, so the water isn't really hot) pressure is low and very foam-ish. The cold water is also running slow, but not foamy.
I then decided to fill the holding tank and discovered the valve underneath was open. So I closed it and filled tank 1/3. Tried the faucet again... Still foamy and very low pressure.
Might there be a valve or something else I need to open/close?
I plan on starting the generator too; I guess I should do that once a month?
Thanks for advice, I'm not the handiest at this sort of thing and welcome any and all advice