Travato Bed Strap Solution
I thought I would share my current solution to the Travato bed strap issue. Using the original single screw, instead of it just going directly through the strap I put it through a "D ring" anchor and then attached the strap to the D ring with clips. My wife sewed the top end at a convenient length and I left plenty of extra on the lower strap to have that extra room necessary for leaving pillows, etc. on the bed in the upright position. On the support side I removed the original felt dots and replaced them with 1/2" furniture bumpers to allow for that additional room that the D ring anchor needs to keep from damaging the support.
Note: Before replacing the screws I filled the holes with Mr. Grip to ensure that the screws would have something to hold to.
2015 Travato (1st Generation).
2002 K1200 LTE