Air from customer manifold

[Dacotah]

I finished the air system yesterday. The fitting on the manifold is not 3/8 but is 1/4, so back to Home Depot and exchange everything for 1/4. The system works fine, but it does take some time to raise the tire pressure by much. I dumped the air by pulling the 2 front lanyards, activating the dump valve on the jacks, and carefully removing the allen screw from the manifold. When airing up the tires, I put the motor on high idle with the cruise control. I bought a 50'' self coiling air hose and it reaches all tires with no problem. Thanks again for all the help from everyone!! DACOTAH