Does anyone know if I can obtain a new or used instrument cluster for my 1999 freightliner chassis/allegro bay pusher and just plug it in or will it need programmed?.. Freightliner in Jackson,MS wants 2400 dollars to replace mine ( 1700) for part and remainder for labor. I looked and it has a couple of plugs and a cable for speedometer and a cable for the tach. I could easily do it if it does not need programming. I also need to know can I just use a seperate oil gauge and pull wires from the sending unit to the front and put in a stand alone gauge?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Does anyone know if I can obtain a new or used instrument cluster for my 1999 freightliner chassis/allegro bay pusher and just plug it in or will it need programmed?.. Freightliner in Jackson,MS wants 2400 dollars to replace mine ( 1700) for part and remainder for labor. I looked and it has a couple of plugs and a cable for speedometer and a cable for the tach. I could easily do it if it does not need programming. I also need to know can I just use a seperate oil gauge and pull wires from the sending unit to the front and put in a stand alone gauge?