info needed on alcoa rims

[mikeissy]

Hello from the uk could anyone out there tell if a set of alloys of a 98 American eagle fit a 04 Damon Escaper both are on freightliner chassis both are ten stud both 22.5 wheels i do not know the size of the hub but I was hoping that there would only be one size or am I been unlucky and there is thousands of sizes thanks Mike

[Gary RVRoamer]

I thought the 1998 American Eagle was on a Spartan chassis. Still might work, though.

Do you know the rim width, e.g. 7.5", 8.25", etc. The width of the rim is one of the factors dictating what tires can be installed on it. If both coaches use the same size tires, they probably have the same wheel width, but if not... And 10 bolt wheels are not always the same - the diameter of the bolt/lug circle can differ as well. So you need to take some measurements.

You also need to know if both coaches use the same wheel type (hub pilot, ball seat, etc).

Here's an Alcoa application guide that might help.

http://www.alcoa.com/alcoawheels/cat...uide8_5x11.pdf