No 12 volt power to abs ecu

[abullit1]

I have lost power to my abs ecu. I have checked all three fuse locations and i cant find any blown fuses.can anybody help me?
it is a 99 discovery 36t

[OddOne]

Do you still have power to all other systems? (ie head lamps, pk lights, radio, starter and such)

[abullit1]

Originally Posted by OddOne

Do you still have power to all other systems? (ie head lamps, pk lights, radio, starter and such)

yes everything works, abs light is on ,tested at ecu gray conector pin #1 and #2 should have 12v with key on.

[OddOne]

It sounds more like an abs sensor has malfunction and the ecu shut down the abs system. Will need to scan the system and find the code for why the abs light is on.

Chris

[abullit1]

Problem solved. ABS relay! Fyi there are two relays to the abs ecm they are located inside frame passenger side next to trans tail shaft. There are four relays in that location if dont know they are there you will never see them. Had to move hoses and wires. The two with red wires are to the abs.