|
09-20-2018, 06:27 AM
|
#1
|
Senior Member
Join Date: May 2016
Posts: 323
|
Steering wheel horn caps ???
02 Dutch Star, how do I get the horn caps of the Freightliner steering column ? Got some thing loose and rolling around in the big center cap and need to see what it is. Thanks Ronnie
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
09-20-2018, 10:20 AM
|
#2
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,495
|
Standard wheel or smart wheel ?
I have the standard , and will look this afternoon at removal , never had to remove , the 4 " horn button, so I'll be finding out.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
09-20-2018, 10:26 AM
|
#3
|
Senior Member
Join Date: May 2016
Posts: 323
|
horn buttons
Mine doesn't have a smart wheel but the center part of it is about 5 x 8 inches . I need to get this one off and it looks like it hooks back under the lower 2x 8 horn button on the bottom. All help appreciated. Ronnie
|
|
|
09-20-2018, 10:30 AM
|
#4
|
Senior Member
Winnebago Owners Club Freightliner Owners Club
Join Date: Jul 2006
Location: Michigan
Posts: 900
|
Steering wheel is supplied/installed by Freightliner, so your fastest/most accurate help would be customer support at 1-800-FTLHELP 1-800-385-4357. Great folks there.
__________________
Ed & Joie
2004 Vectra 40KD
Freightliner Chassis and Cummins ISC
|
|
|
09-20-2018, 10:32 AM
|
#5
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,495
|
OK , way different than my 99.
Have you looked up from underside of the spokes for; recessed retaining screws ?
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
09-20-2018, 04:02 PM
|
#6
|
Senior Member
Join Date: May 2016
Posts: 323
|
Steering
I guess that is my next move, there is certain postions I can't get in because it cuts for breathing off. I have very bad lungs. If you flip the horn swith on the panel is this suppose to cut off the regular horn and switch to the big horns ? When I flip mine it doesn't do any thing and the regular horn keeps working. I'll just keep tinkering with it when I can. Thanks very much for all the help, Ronnie
|
|
|
09-20-2018, 04:12 PM
|
#7
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,495
|
Take a mirror into the coach , to see what's on the backside of the wheel's spokes. You could need a phillips screw driver or 5/16" nut driver to remove the horn pad.
My air horn dash switch just adds the air horns to the electric ones; they are always on . You have to pull a fuse or the relay to shut them down.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
12-17-2018, 05:16 PM
|
#8
|
Senior Member
Join Date: May 2016
Posts: 323
|
Cap
There are no screws on the back side, had it unhooked at the top but could not get the bottom to come loose. I guess I'm just going to have to let go. I called Freightliner 3 times and got 3 different stories and none of them worked. Thanks very much !!
|
|
|
12-17-2018, 09:08 PM
|
#9
|
Senior Member
Join Date: Feb 2016
Posts: 646
|
If you're trying to get your air horn(s) to work, you likely don't have to get into the steering wheel. I had this problem and found my horn was plugged by mud daubers. Once cleared, it worked in tandem with the electric horn.
Sorry if this is off base with what you're trying to do.
__________________
2022 RAM 3500 Cummins SRW long bed, 2019 Open Range 319 RLS, Reese Goosebox, disk brakes
|
|
|
01-23-2019, 07:40 AM
|
#10
|
Senior Member
Newmar Owners Club Winnebago Owners Club Freightliner Owners Club
Join Date: Mar 2016
Location: Kingman Az
Posts: 1,686
|
in the center of the wheel near the bottom, there is a hex screw that you can undo that takes off the plastic padded center. there are smaller phillips screws that remove the horn buttons. I believe 10 in total. I have mine apart if you need some pix! Takes about 10 mins to completely take it apart.
__________________
May your black water hose never break!
|
|
|
01-23-2019, 08:43 AM
|
#11
|
Senior Member
Join Date: May 2016
Posts: 323
|
Horn Pad
I would really like to get the cap off, I have something loose in side it rolling around. Any help would be appreciated. Thanks Ronnie
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|