Another Shower Question!!

[Busskipper]

Note to others there is a thread on Parts for TS and they have "ROLLERS".

I'll give them a call and report back as soon as I get back in town and am in the Coach.

But I understand they have the ROLLERS.

[asodergren]

I installed our new enclosure today. I caught it on sale for $351.99 with free shipping on eBay.

[goazugo]

Looks beautiful, you did a great job.
Thanks for the rollers.
Pat

[trux]

I installed the Contoura model made by MAAX from Home Depot.
Good price too, $580 CDN, well made and easy installation.

[djnorton]

Originally Posted by Dl20415

Looks like my shower troubles might finally be over! I called Shower Enclosures of America and they are shipping me a new enclosure! The part number that you gave me has been discontinued, but he made sure the one they ship will fit my pan. The new shower will be a frameless shower. Price for shower was 350.00, shipping 150.00! I could have picked it up if I was going to be near Indiana, but that wasn't gonna happen.

Interested in changing my enclosure out.. do you still have the part number and phone number?

[Ron & Peri]

Open letter to all that have replaced:
How smoothly does yours open and close? I don't like the "flimsy" feel of mine, the rollers are fine and everything works well, it just seems "chintzy" My sliding glass in my Montana 5r is so solid and well built I was really impressed with it. Maybe because it is flat instead of curved??? I am looking for a superior quality door that looks and feels like it is worthy or being in my coach. ;-)

I have also thought about replacing the floor pan with a square one and using a hinged door instead of the sliding. Anyone done this? I have attached my floorplan.

[Airforce1999]

I have gone through every roller I can find. The track is worn out as well. Just ordered a new enclosure. $450 delivered.

Traico Marinoff
Parts and Warranty
Shower Enclosures America
501 Kettering Drive
Ontario, CA 91761
800-536-7324 x3110

[Airforce1999]

Trux, Is yours 70” tall? My max was 67 1/2” do you have the part number of the one you bought?

[trux]

AF1999: The model I installed was the MAAX Contoura 40 inch corner round. I just happened to have the Home Depot receipt but it is in french as it was purchased in Montreal at a local HD. The MAAX factory is in Montreal. MAAX gave me a template to determine the radius of the stall, worked great! I was at Shower stalls of America in Elkhart, IN. in July 2016 and after all their hype on the phone, they had a look at my shower stall and said they didn't make one that large. The Contoura was well built and had a very well designed roller system. I found this number on the receipt, you can give it a try, good luck,: 319531164 at Home Depot.

[kartinguy]

Originally Posted by Bslagh

Attachment 128568

Do you remember the manufacturer is of the shower doors that was used in your replacement? Thank you!

[Bslagh]

Originally Posted by kartinguy

Do you remember the manufacturer is of the shower doors that was used in your replacement? Thank you!

I don’t sorry, Paul’s did that one....and he actually just tore it out because we replaced the whole shower.

[kartinguy]

Originally Posted by Airforce1999

I have gone through every roller I can find. The track is worn out as well. Just ordered a new enclosure. $450 delivered.

Traico Marinoff
Parts and Warranty
Shower Enclosures America
501 Kettering Drive
Ontario, CA 91761
800-536-7324 x3110

Did the height work out ok? Do you have pictures of the installation? Would appreciate any information that you can offer on the project. Thank you.

[Airforce1999]

Originally Posted by kartinguy

Did the height work out ok? Do you have pictures of the installation? Would appreciate any information that you can offer on the project. Thank you.

Yes just put it in.

[Airforce1999]

I do have the old shower enclosure if anyone needs parts. The rollers are toast.