|
It looks like you have determined which breaker runs the outlet. If it is not on the inverter panel it will not run without house or generator power (I am assuming one of the panels you mention is the inverter panel, it will usually have a 30A "main" breaker and several smaller breakers).
As slabman mentioned, you may be able to move the circuit. Basically, you have to remove the wire from the house panel and install it in the inverter panel. This will most likely involve adding a circuit breaker to the inverter panel as well (usually, the mfr does not install spares). Adhering to electrical codes is important here, so you may want to consult an electrician if you are unsure on how to proceed.
Stewart
__________________
Stewart, Brenda and kids
2008 Newmar Canyon Star 3410
|