Well when all else fails use a volt meter and read the manual.
First off the 30 amp breakers are for AC
in to the inverters.
I had 110 Volts in to the breakers and 110 volts out so clearly the breaker wasn't my functional issue.
It appears the "internal problem" in the breaker is just the way the color (red) band is functioning or not functioning.
Then I managed to get a manual for the Xantrex inverters and remote control panel.
Turns out that what I thought was just an indicator on the remote was actually a switch.
Also, clearly noted in the manual, "it may take several minutes after powering up before the remote indicators indicate actual battery levels and system status". As such, I was thinking I had under charged or drained batteries when in fact they were fully charged and quite healthy.
I should have realized this as my slides go in and out briskly which would not be the case if the batteries were drained and not charging.