Community Forums

mski · 01-10-2018, 05:49 PM

thought I would post this to see if anyone had same problem.
dash gauge for volts stop working, checked volts on battery and it is still charging wondered if their is a fuse for this gauge as others in cluster are working, had problem with speedometer they replaced all moduals and then put grease on terminals it seems to have worked. have also used diagnostics on speedometer and all gauges seem to work
thanks for all help.
mike

rag_ftw · 01-10-2018, 09:05 PM

Who is the gage supplier? I had the same problem with my NGI gauges. If yours are NGI I don't believe here are any fuses.

Does voltmeter pass diagnostic test?

Has the voltmeter worked since they replaced the speedo?

mski · 01-11-2018, 09:09 AM

yes volt meter worked only speed did not .it all worked for over year just had problem now. not sure what gauges are .

cookie357 · 01-11-2018, 09:10 AM

I still have not got any of My dash,gauges working. Does anyone have the part to use on modem to match with gauges

rag_ftw · 01-11-2018, 09:20 AM

Does your voltmeter have a red light at the bottom? Is it illuminated and if so is it blinking?

What does the voltmeter do when you run diagnostics?

Without knowing the vendor for your gages I will not be much help. If you will look at the back of a gage it will tell you who the manufacturer is. Here is a .pdf of mine.