Floor Heat

[Dl20415]

I have a 2007 Travel Supreme Alante and I'm trying to determine if I have floor heat or if I have a problem. I can set my thermostat to zone 2 and furnace but nothing happens. I suspect I may have a wiring problem. I removed the cover in the hydro hot controller and I do have wires connected to zone 2 thermostat connections, but there are wires also connected to zone 2 fans! Has anyone ever looked at their connections in the controller to see how they are wired?



Here is a photo of my controller

["007"]

Not sure what heating system you have but here is a link from the stickies above that may give you a start.

[justaroamer]

Chances are you do not unless ordered as an option. Do you have carpet/tile in forward living area? If you do probably not. Full tile in forward living area, good chance.
Easy way to determine is to turn on Hydro/Aqua Hot. With Thermostat on zone 2 set to heat above current temp. Can you hear a pump running on the Hydro Hot?
If not, you most likely do not have or you have a bad pump.