Rear Slides Don't Go out Fully
I have a 2006 TS 42 DS04. Both rear slides seem to move outward with the tops leading the bottoms, the same way the front slides do. However, the top of the slide stops about 3/4 inch before reaching the wall while the bottom continues until it touches the wall. When facing each slide from the inside, the top right is further from the wall than the top left.
We just had rain with winds up to 74 mph. The bedroom floor on the side facing the wind got wet. I suspect that the slide is not reaching the rubber seal. Rain has not leaked in during previous storms.
I found steel rollers with adjustment nuts under the bed. The nuts were bottomed out in the direction I thought they had to go. I adjusted the nuts in the opposite direction and the gap at the wall at the top seemed to get larger.
Does anyone have ideas on how to get these slides to seat flush against the wall?
Tom
__________________
Tom & Judy
2006 Travel Supreme 42 DS04
04 GMC Envoy XL
|