 |
01-22-2016, 01:34 PM
|
#1
|
|
Senior Member
Coastal Campers Spartan Chassis
Join Date: Jan 2011
Location: Klamath Falls, Oregon/Savannah, GA
Posts: 138
|
Turn/Dimmer switch replacement
Turn/Dimmer switch replacement; dimmer stuck open no lights, high or low beam. Removed switch found loose connection, melted the plastic holding the flat part of the switch, not making contact. New one on the way form Spartan. Problem; it appears the switch comes without a lever, re-use the old lever, which, appears to be attach via a drift/shear pin, which will have to be drilled out. Anyone replaced this? If so; help, all the info  2007 42 Envoy TS
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
01-22-2016, 03:29 PM
|
#2
|
|
Registered User
Join Date: Mar 2010
Posts: 8,777
|
Quote:
Originally Posted by Redonion
Turn/Dimmer switch replacement; dimmer stuck open no lights, high or low beam. Removed switch found loose connection, melted the plastic holding the flat part of the switch, not making contact. New one on the way form Spartan. Problem; it appears the switch comes without a lever, re-use the old lever, which, appears to be attach via a drift/shear pin, which will have to be drilled out. Anyone replaced this? If so; help, all the info 2007 42 Envoy TS |
Redonion
Many headlight switches have a "push button" or a "hole into which a paper clip can be inserted" which releases the push/pull shaft allowing it to be removed.
If your doesn't methinks you will have to order a new shaft from Spartan.
Mel
'96 Safari
|
|
|
|
|
01-23-2016, 08:58 AM
|
#3
|
|
Senior Member
Coastal Campers Spartan Chassis
Join Date: Jan 2011
Location: Klamath Falls, Oregon/Savannah, GA
Posts: 138
|
Turn/Dimmer Switch Replacement
Mel,
Good to hear from you.. Thanks, will check this out. Switch was easy to come out. Will play around with it. New switch should be here Tuesday.
Safe Travels,
Fred
|
|
|
|
|
02-09-2016, 09:17 AM
|
#4
|
|
Senior Member
Coastal Campers Spartan Chassis
Join Date: Jan 2011
Location: Klamath Falls, Oregon/Savannah, GA
Posts: 138
|
Switch installed, Dave Matthews at Spartan, The turn signal switch for VIN# 58598 is part# 0978-KK1-86001. The cost is $164.33, and we have them in stock. Loose connection on the switch body, not good. Now all works as OEM.
|
|
|
|
|
05-20-2016, 06:08 PM
|
#5
|
|
Senior Member
Join Date: May 2014
Location: Milford, Michigan
Posts: 1,115
|
Quote:
Originally Posted by Redonion
Switch installed, Dave Matthews at Spartan, The turn signal switch for VIN# 58598 is part# 0978-KK1-86001. The cost is $164.33, and we have them in stock. Loose connection on the switch body, not good. Now all works as OEM.
|
Need to replace the turn signal switch. any clues as to how to remove the steering column shield or cover to access the switch and any specifics on replacing the switch I should watch for?
__________________
2013 ANTHEM RBQ
AL and Sally and Ava and Ivy
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
