Which engine on 08 TS Insignia

[wydeglyde]

Thank you both, I will try downloading the app

[wydeglyde]

Originally Posted by The Driver

I have a Cummins app that claims to interpret fault codes. List your engine serial number here & I'll see if the app works!

ISL s/n 46764839

The code is 101

[Steve Ownby]

Originally Posted by wydeglyde

ISL s/n 46764839

The code is 101

I entered your engine # in the Cummins Quick serve app.

The code 101 does not apply to this serial number.


Steve Ownby
Full time since '07

[The Driver]

I struck out on that app too, although the serial number appeared to result in all the right info for your engine in that coach. Hmmm, I think I saw a post on the Newmar or Entegra forums in the last day or two about cross-referencing Spartan codes for Cummins engines. Not sure at all what was meant, but it seemed like your dash readout could be run by Spartan, and the codes would have to be "translated" into Cummins codes. Brother....

[wydeglyde]

Thanks for the help. I searched the site for Spartan/Cummins codes. Found some links, likely one you saw, but no luck.

Probably have to call Spartan.

[wydeglyde]

I called Spartan today and talked a very helpful friendly man there. I gave him the code and he looked it up for me

The 101 code is Engine Crankcase Pressure High. The FID 0 indicates it is the least severe condition and can be repaired at the next service. I'm going to do some research to locate the breather location and part number and hopefully replace it myself.

Thanks all for your help.

[Redonion]

Good find; keep us posted as to what you find or repair..
Thanks, & safe travels,
Fred