Community Forums

turbo24 · 04-20-2012, 05:33 PM

Just getting my TS Limited out from winter storage. To my surprise the drivers side has come loose from the front cap. My coach has 42,000 miles and has been a great coach. Did X Brace the basement after coach was a year old.

The Driver · 04-21-2012, 09:47 AM

Ooooo, never heard of a K3 having flex problems! You must have, and had some bracing work done, eh?

Too bad, so sad.

Ann n Gene · 04-21-2012, 11:33 AM

Check to make sure the PASSENGER side glass is in the proper place. After they did the x bracing IF they did not get BOTH sides seated properly the passenger slide glass can move toward the drivers side and pop it out. Ask me how I know that, lol. Anyway, just an idea, check that other side and make sure it is not ready to fall out or moved toward the driver side.

336muffin · 04-21-2012, 11:44 AM

turbo, I have a question. Was the MH stored on a surface that is perfectly level? The reason I asked this popped the windshield out of my American Eagle twice until we figured it out. The pavement I was storing it on was not level at all the tire contact points and in time twisted my chassis. I have a concrete pad that is dead level with no problems.

turbo24 · 04-22-2012, 07:22 PM

Quote:

Originally Posted by Ann n Gene

Check to make sure the PASSENGER side glass is in the proper place. After they did the x bracing IF they did not get BOTH sides seated properly the passenger slide glass can move toward the drivers side and pop it out. Ask me how I know that, lol. Anyway, just an idea, check that other side and make sure it is not ready to fall out or moved toward the driver side.

Gene
I did have issue with the passenger side, it wasnt coming out but, there was movement as a preventive measure had just the passenger side re glued.

The Driver
Yes, did the center basement X brace, i am checking into doing an X brace on the front of fuel tank

336muffin
is garaged in a level area, I did have one front pad sink away after a big rainstorm a couple years ago, putting the front in twisting position. I believe this is when my issues began

THX all for the great input.