Magnum Inverter "Final Charge" Setting

[TXBart]

Flooded, AGM2 or Custom on my Magnum does not offer a SET09. Didn't look as I went thru AGM1.





Vance & Robin
Dexter and Winston - Old English Sheepdog Security Service
2014 Entegra Anthem 42DEQ

[757driver]

Originally Posted by TXBart

Flooded, AGM2 or Custom on my Magnum does not offer a SET09. Didn't look as I went thru AGM1.





Vance & Robin
Dexter and Winston - Old English Sheepdog Security Service
2014 Entegra Anthem 42DEQ

Vance,

It appears mid way through the 2014 model year the Magnum remote panel had a software revision that included SET 09 and SET10. From what I remember from that earlier version the panel did not transition from Float to Full unless there was no draw on the batteries for a set period of time. When the coach is in use this will probably not happen very often, if at all. For the Magnum remote with revision of 2.7 or later if Multi is programmed into SET09 the charger will transition from Float to Full after 4 hours.

[TXBart]

Originally Posted by 757driver

Vance,



It appears mid way through the 2014 model year the Magnum remote panel had a software revision that included SET 09 and SET10. From what I remember from that earlier version the panel did not transition from Float to Full unless there was no draw on the batteries for a set period of time. When the coach is in use this will probably not happen very often, if at all. For the Magnum remote with revision of 2.7 or later if Multi is programmed into SET09 the charger will transition from Float to Full after 4 hours.

Don,

I just got my EC-30 back from getting the most current software/firmware update. Grover also remove resistor 37. Still no SET09 or SET10. The users manual indicates SET09 isn't available with Custom battery selected but I didn't have it when I had AGM2 selected either.


Vance & Robin
Dexter and Winston - Old English Sheepdog Security Service
2014 Entegra Anthem 42DEQ

[757driver]

Originally Posted by TXBart

Don,

I just got my EC-30 back from getting the most current software/firmware update. Grover also remove resistor 37. Still no SET09 or SET10. The users manual indicates SET09 isn't available with Custom battery selected but I didn't have it when I had AGM2 selected either.


Vance & Robin
Dexter and Winston - Old English Sheepdog Security Service
2014 Entegra Anthem 42DEQ

Vance,

Set 09 and Set 10 have nothing to do with the EC-30, they are settings in the Magnum inverter panels. Under the Tech button on the inverter panel "02 Revisions" push the round dial once to get to Inverter revision then rotate the dial clockwise one click to see the remote revision. You need revision 2.7 or higher to have Set 09 or Set 10. Also Set09 and Set 10 are not a function of the battery type selected under Setup 04. You either have them or you don't.

[Misty123]

Originally Posted by 757driver

Vance,

Set 09 and Set 10 have nothing to do with the EC-30, they are settings in the Magnum inverter panels. Under the Tech button on the inverter panel "02 Revisions" push the round dial once to get to Inverter revision then rotate the dial clockwise one click to see the remote revision. You need revision 2.7 or higher to have Set 09 or Set 10. Also Set09 and Set 10 are not a function of the battery type selected under Setup 04. You either have them or you don't.

So Don can this be set on the inverter if you have the vega touch?

[757driver]

Originally Posted by Misty123

So Don can this be set on the inverter if you have the vega touch?

No, unfortunately not. Entegra did not include this setting nor several other important inverter settings into the Vegatouch.