Community Forums

Fattman-Litlboy · 06-02-2016, 09:54 AM

Has anyone looked down into the bathroom Grey/Black vents from the roof after removing caps and if so, did you see plywood 8 inches down or was it hollow all the way down?

loisjop · 06-02-2016, 09:59 AM

Quote:

Originally Posted by Fattman-Litlboy

Has anyone looked down into the bathroom Grey/Black vents from the roof after removing caps and if so, did you see plywood 8 inches down or was it hollow all the way down?

I don't think you should be able to see plywood, period, when looking in a vent. Noel

Magic-carpet · 06-02-2016, 12:41 PM

Quote:

Originally Posted by Fattman-Litlboy

Has anyone looked down into the bathroom Grey/Black vents from the roof after removing caps and if so, did you see plywood 8 inches down or was it hollow all the way down?

If you are seeing plywood you are most likely not looking down a tank vent. There are several "vent" caps on pipes that are added at the factory that are there if you want to run wires through the roof for a sat dish or maybe solar panels. Also, the vent caps are not always mounted right above the tanks. We found ours on the 2014 44B towards the back. There were actually 4 vent pipes. You might run a little water in the drains and listen at the caps to see if you can hear it running.

Fattman-Litlboy · 06-02-2016, 01:00 PM

Actually took all 4 off and every one had solid plywood about 8 inches down. One even had standing water in it. Could you please give me a call?
Jim
904-432-8484