Quote:
Originally Posted by brobox
It is a fairly easy fix if you want to do it or have the dealer do it. There is almost a 1 inch lip on the bottom plastic tray. Remove the tray, about 10 screws. Measure the lip and with a jig saw cut the wood out where the tray sits on the back side. Slide the tray back and screw it back to the wood floor, making SURE you leave enough wood in front for the front lip of the tray to be screwed to the floor. Spray foam the front gap from underneath where the old cut out was and the sewer connection will line up. That is what Entegra did to fix mine.
|
Chuck, it seems to me that using spray foam to fill the gap left at the front of the tray would leave an unsightly, lumpy mess of a surface. Did they do something to restore the upper surface of the patch?