The "Switch" is In

[Flanz]

As others have suggested, move the switch cover to the new switch. That’s what I did and since I’m usually the only one who drives the coach I know how to use the switch. The bride will understand after she’s driven the coach a few times using the switch.

Now, I added the LEDs to make it easier to remember the state of the tag axle. Red LED is for the “hold” part of the switch. This is because with the hold it removes air for the tag air bags and keeps the tag axle from dragging while driving around the campground. The hold was the toggle part on the old switch.

The green LED is for the auto part of the old and new switch. This is for my bride. It tells her that green means good and you can go. This will only deflate the tag air bags in reverse and she understands this.

And of course off turns off both LEDs and means off. The tag air bags will never deflate....

Hope this helps!

[RickMonroe]

PERFECT! Thanks