|
|
06-03-2019, 04:50 PM
|
#1
|
Senior Member
Join Date: Jul 2013
Location: Louisiana
Posts: 230
|
Vega Touch A/C problem
2020 Aspire. I'm plugged into 50 amp shore power and A/C's not cooling. They running but it's 88-90* inside. (No breakers thrown)
Everything on Vega touch set correct, i.e. cool, auto fan and 76*. Display on all 3 zones reads "SHED"
Called Fire Fly and they said invertor is ON and unit is 'shedding' power and A/C won't work correctly. Turn invertor OFF. (I now have to manually turn invertors OFF when I shut down coach?)
So I go to the coach and invertor only has 2 settings, Pass Thru and Disabled so I choose 'Disabled."
A/C Power Source is showing No Shore when I am in fact plugged in.
Charger choices are Float and Disabled and I left on Float.
Still says SHED and it's still not cooling.
Help! This Vega Touch is going to take getting used to.
Thanks in advance.
__________________
2020 Aspire 44W
NE Louisiana
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
06-03-2019, 04:58 PM
|
#2
|
Senior Member
Entegra Owners Club Spartan Chassis
Join Date: Feb 2010
Posts: 4,251
|
Until you get that figured out, on my '18 Anthem (I know, different year, different model, but, with VegaTouch), in the compartment over the entry door, there are three "override" switches that will turn on the air conditioning with a command of, if I recall correctly, 75 degrees. As I understand that bypasses the VegaTouch input.
Good luck.
Take care,
Stu
__________________
"I would rather have questions that can't be answered than answers that can't be questioned."
2018 Anthem 42DEQ
|
|
|
06-03-2019, 04:59 PM
|
#3
|
Community Moderator
Monaco Owners Club
Join Date: Jul 2016
Location: Central, Arkansas
Posts: 11,292
|
Is the breaker on the pedestal turned on ? Do you have an EMS and is it blocking the shore power because of low voltage or an improper ground issue ?
__________________
2004 Beaver Monterey Laguna IV
Cummins ISC 350HP Allison 3000 6 speed
2020 Chevy Equinox Premier 2.0t 9 speed AWD
|
|
|
06-03-2019, 06:03 PM
|
#4
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,735
|
If it a vega touch issue, reboot 12v power supply. After the last vega touch update, I had to reboot three times before the A/C's would start working.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
06-03-2019, 06:14 PM
|
#5
|
Senior Member
Join Date: Jul 2013
Location: Louisiana
Posts: 230
|
Current Vega Touch display
Quote:
Originally Posted by Whizzer60
2020 Aspire. I'm plugged into 50 amp shore power and A/C's not cooling. They running but it's 88-90* inside. (No breakers thrown)
Everything on Vega touch set correct, i.e. cool, auto fan and 76*. Display on all 3 zones reads "SHED"
Called Fire Fly and they said invertor is ON and unit is 'shedding' power and A/C won't work correctly. Turn invertor OFF. (I now have to manually turn invertors OFF when I shut down coach?)
So I go to the coach and invertor only has 2 settings, Pass Thru and Disabled so I choose 'Disabled."
A/C Power Source is showing No Shore when I am in fact plugged in.
Charger choices are Float and Disabled and I left on Float.
Still says SHED and it's still not cooling.
Help! This Vega Touch is going to take getting used to.
Thanks in advance.
|
Current Vega Touch display
__________________
2020 Aspire 44W
NE Louisiana
|
|
|
06-03-2019, 06:21 PM
|
#6
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,735
|
Start the generator and see if you get shore power.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
06-03-2019, 06:30 PM
|
#7
|
Senior Member
Join Date: Jul 2013
Location: Louisiana
Posts: 230
|
Quote:
Originally Posted by spdracr39
Is the breaker on the pedestal turned on ? Do you have an EMS and is it blocking the shore power because of low voltage or an improper ground issue ?
|
Yes sir. All green lights on the EMS (surge protector?) and breaker good. Thanks for the heads up!
__________________
2020 Aspire 44W
NE Louisiana
|
|
|
06-03-2019, 06:32 PM
|
#8
|
Senior Member
Join Date: Jul 2013
Location: Louisiana
Posts: 230
|
Quote:
Originally Posted by brobox
If it a vega touch issue, reboot 12v power supply. After the last vega touch update, I had to reboot three times before the A/C's would start working.
|
I did reboot and at the same time I engaged the 3 AC over rides above the door. Will see in the morning if reboot helped. It did get rid of the SHED message (as in shedding power). Thanks!
__________________
2020 Aspire 44W
NE Louisiana
|
|
|
06-03-2019, 06:34 PM
|
#9
|
Senior Member
Join Date: Jul 2013
Location: Louisiana
Posts: 230
|
Quote:
Originally Posted by 777 Driver
Until you get that figured out, on my '18 Anthem (I know, different year, different model, but, with VegaTouch), in the compartment over the entry door, there are three "override" switches that will turn on the air conditioning with a command of, if I recall correctly, 75 degrees. As I understand that bypasses the VegaTouch input.
Good luck.
Take care,
Stu
|
I have done that so at least it'll cool down. Thanks for the reminder!
__________________
2020 Aspire 44W
NE Louisiana
|
|
|
06-03-2019, 06:43 PM
|
#10
|
Senior Member
Entegra Owners Club
Join Date: Dec 2008
Location: Chattanooga, TN
Posts: 907
|
I'm a process engineer (Electrical Degree) by trade and have tons of experience with translating between various interfaces / protocols with different systems. With our coaches I can't believe we don't have a more common standard, such as bluetooth to communicate between devices. If bluetooth were not developed in it's time the wireless connectivity issues would mimic our current vega touch systems...There should be a standard comm for devices on RVs and it should be a standard for any device added to a modern coach...
__________________
2012 Entegra Aspire
2012 Nissan Xterra Pro4x Tow
Ready Brute Elite
|
|
|
06-03-2019, 08:53 PM
|
#11
|
Senior Member
Nor'easters Club
Join Date: Feb 2009
Posts: 795
|
My 18 had a similar problem...plugged into 50 amps but no A/C ! Issue was communication wire from the transfer switch to Vega touch that indicated how much power from shore ... problem was a bad crimp at the plug located on bottom of transfer switch... wires fell out when plug removed . Plug is a telephone wire type plug. The wire is about 18” long , plugs into wire harness.
__________________
2020 Anthem 44F
23 Jeep Cherokee Summit Reserve
BAILEY and BUSTAH,our Boston Terriers!
|
|
|
06-04-2019, 05:06 AM
|
#12
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,735
|
Quote:
Originally Posted by ditto
My 18 had a similar problem...plugged into 50 amps but no A/C ! Issue was communication wire from the transfer switch to Vega touch that indicated how much power from shore ... problem was a bad crimp at the plug located on bottom of transfer switch... wires fell out when plug removed . Plug is a telephone wire type plug. The wire is about 18” long , plugs into wire harness.
|
Thanks for confirming it does happen. Usually starting the generator will tell if there is a shore power problem. At least it narrows it down to where to start looking.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
06-04-2019, 06:26 AM
|
#13
|
Senior Member
Join Date: Jul 2013
Location: Louisiana
Posts: 230
|
Quote:
Originally Posted by brobox
Thanks for confirming it does happen. Usually starting the generator will tell if there is a shore power problem. At least it narrows it down to where to start looking.
|
Going to do that in just a bit and will get back to you.
__________________
2020 Aspire 44W
NE Louisiana
|
|
|
06-04-2019, 12:27 PM
|
#14
|
Senior Member
Entegra Owners Club
Join Date: Jun 2004
Location: Bayfield, Ontario
Posts: 5,470
|
Quote:
Originally Posted by Whizzer60
Current Vega Touch display
|
Your Vegatouch is not showing any volts, amps, of frequency sense for line 1 or line 2. The connection at the transfer switch may be disconnected or poor contact.
As Chuck mentioned try starting the generator and see if the AC will run.
__________________
Don & Gerri
2014 Entegra Anthem 44B
2014 Honda CRV Touring
1300W Solar, 1200AH LiFePO4 FMCA F443497
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|