Washing Machine Code

[Bill in FL]

DW started the "clean washer" cycle today. It seemed to start normally, then stopped with an F22 code. Looked in the manual and that code says that it senses clothes in the washer and to reset the code, then cancel the cycle and check for clothes in the machine. Did all that, nothing in the machine. Restarted the cycle, but the spin light is on and all it does is a real short spin and returns the F22 code. Checked all the other cycles and they work normally, whew! Anyone else have this condition and how did you clear it?

[johnnyreno]

make sure you have water pressure, and un plug and try again ours did this then worked fine afterwards still don't know why there is also a small spin filter in the front compartment easy to get too see if theres any thing in it too..

[loisjop]

DW started the "clean washer" cycle today. It seemed to start normally, then stopped with an F22 code. Looked in the manual and that code says that it senses clothes in the washer and to reset the code, then cancel the cycle and check for clothes in the machine. Did all that, nothing in the machine. Restarted the cycle, but the spin light is on and all it does is a real short spin and returns the F22 code. Checked all the other cycles and they work normally, whew! Anyone else have this condition and how did you clear it?

Bill, I had the same problem and here's what fixed it.
Select clean then push the cancel button 4 times within 5 seconds. Machine will run through a reset. Reselect clean cycle and machine should run ok.
We haven't had another problem since we reset the machine. Noel

[Bill in FL]

Bill, I had the same problem and here's what fixed it.
Select clean then push the cancel button 4 times within 5 seconds. Machine will run through a reset. Reselect clean cycle and machine should run ok.
We haven't had another problem since we reset the machine. Noel[/QUOTE]

Thanks, Noel. I am running the clean washer cycle right now after the reset you described. It looks like it is working. Will know in about another 100 minutes. Is that reset similar to a computer reboot?

[loisjop]

Originally Posted by Bill in FL

Bill, I had the same problem and here's what fixed it.
Select clean then push the cancel button 4 times within 5 seconds. Machine will run through a reset. Reselect clean cycle and machine should run ok.
We haven't had another problem since we reset the machine. Noel

Thanks, Noel. I am running the clean washer cycle right now after the reset you described. It looks like it is working. Will know in about another 100 minutes. Is that reset similar to a computer reboot?[/QUOTE]
If it's running it's good. You and I and now Entegra owners are the few people that know about this. I guess I should call Entegra cs and tell them. I suppose it's similar to a computer reboot. Noel

[loisjop]

Bill, how did your washer turn out? Noel

[Bill in FL]

Originally Posted by loisjop

Bill, how did your washer turn out? Noel

Your reset fixed it. Thanks for the help. This forum is the greatest for assistance on all kinds of problems.

[loisjop]

Originally Posted by Bill in FL

Your reset fixed it. Thanks for the help. This
forum is the greatest for assistance on all kinds of problems.

Glad it fixed it. Noel