|
|
05-01-2016, 04:01 PM
|
#1
|
Senior Member
Thor Owners Club
Join Date: Jan 2014
Posts: 172
|
Entrance door gas-strut, what force?
The gas-strut that holds our entrance door open has become weak, I guess Saskatchewan winters are enough to deflate anything.
The original strut is: Titan #GN6-200-20-75MM. Unfortunately this doesn't correspond to the nomenclature on the Titan web site so I can't determine for sure what the nominal force of the strut is, I assume 20 or 75 lbs.
If anyone has replaced this gas strut please let me know how much force your replacement exerts. 20 lbs. seems a bit light.
Gary
__________________
Gary & Jeannette
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
05-01-2016, 09:30 PM
|
#2
|
Senior Member
Join Date: Jun 2014
Posts: 214
|
We got tired of the gas strut and removed it. Installed a rubber bumper and a latch on the outside of door. Makes it so much better than fighting that strut.
__________________
2016 Palazzo 33.2, Fiat 500 toad with Patriot Braking System.
|
|
|
05-02-2016, 02:27 PM
|
#4
|
Registered User
Join Date: Aug 2014
Location: western NC mountains!
Posts: 4,106
|
Quote:
Originally Posted by doublebs
We got tired of the gas strut and removed it. Installed a rubber bumper and a latch on the outside of door. Makes it so much better than fighting that strut.
|
we did the same - and we dont miss that darn strut!
we can latch the door all the way open and enjoy the breeze
|
|
|
05-03-2016, 09:16 AM
|
#5
|
Senior Member
Thor Owners Club
Join Date: Jan 2014
Posts: 172
|
Thanks for the input. We've also been thinking of a hold-open device but I'm reluctant to start drilling holes in the side of the coach. If anyone has pictures of their installation handy...
For the time being I replaced the strut at NAPA auto parts with a 20-pounder but I had to interchange the end connectors from the old strut to the new strut because they were too large on the new strut to fit under the door.
__________________
Gary & Jeannette
|
|
|
05-03-2016, 07:09 PM
|
#6
|
Senior Member
Join Date: May 2013
Location: GA
Posts: 206
|
Here ya go...
__________________
Bob & Sandy
2013 Thor Palazzo 33.2
|
|
|
05-03-2016, 09:31 PM
|
#7
|
Senior Member
Join Date: Jun 2014
Posts: 214
|
Install a rubber door stop to complete the mod.
__________________
2016 Palazzo 33.2, Fiat 500 toad with Patriot Braking System.
|
|
|
09-08-2019, 01:12 PM
|
#8
|
Member
Join Date: Nov 2018
Posts: 31
|
In case anyone is still looking at this as I just did, twenty pounds is probably about right. I bought and installed a forty pound strut from Camping World off the the shelf (it was the lowest pressure they carry) and it is way too much. Twenty would probably be about right. I have to use a strut because the location of the awning arms prevents the door from opening 180 degrees.
|
|
|
09-08-2019, 07:58 PM
|
#9
|
Senior Member
Thor Owners Club Newmar Owners Club Entegra Owners Club
Join Date: Nov 2014
Location: San Antonio, Texas
Posts: 161
|
We removed it also!! Much better!!
|
|
|
09-08-2019, 08:27 PM
|
#10
|
Senior Member
Join Date: Nov 2017
Location: Oakhurst, CA
Posts: 926
|
I did a add on modification and 10 lbs and it is just right.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________
2007 Country Coach Tribute 260 Sequoia
40' DP w/Cat400, F494513, Lithium Battery & Solar
Live next to Yosemite
|
|
|
09-09-2019, 02:57 PM
|
#11
|
Member
Monaco Owners Club
Join Date: Oct 2015
Posts: 87
|
I am looking for solutions to hold open the door on the Monaco. The scissor thingy is pretty floppy and worthless.
For those that have gone to a gas strut, what is it that appeals to you?
For those that have removed the strut, what is it that irritated you about it?
thanks!
__________________
2004 Monico Diplomat LE 40DST, 2013 Ram 1500 toad, with a Harley Ultra limited in the box.
|
|
|
09-10-2019, 05:17 AM
|
#12
|
Senior Member
Thor Owners Club Newmar Owners Club Entegra Owners Club
Join Date: Nov 2014
Location: San Antonio, Texas
Posts: 161
|
We took if off because it is a lot easier to bring everything into the coach! The door is not in the way! We latch it to coach when we are parked and it makes it easier for the grandkids to go in and out! Before having the halfway open it was just in the way all the time!
|
|
|
09-10-2019, 09:22 AM
|
#13
|
Senior Member
Join Date: Nov 2017
Location: Oakhurst, CA
Posts: 926
|
I like to use the screen a lot and the door was just swinging in the wind.While the door has stop to limit open travel there is nothing to hold it in place. I was also concerned a strong wind could cause the door to exceed the designed travel causing a catistrofic failure.
The strut solved all these problems.
Here were my concerns as I set up to install it.
I wanted the open position to be at a 90 degree angle, straight out so I had no space limitation when entering.
I did not want to make it so strong I had to push hard to close it and opening would need to be easy too as the strut expands.
I also had concerns about mounting. The structure has to be strong to handle the stress I was adding.
I had to carefully select the right type of fastener. I was concerned a sheet metal screw would be either too loose or over tightened and then over time become loose. Using a bolt and nut was an option but it might not look so good on the inside and it could mean squashing the frame to be tight. In the end I decided to use rivets and it worked very well.
Setting the mounting location was the hardest part. The strut needed to open fully and the door stop where I wanted it to. Then when closed it could not run out of travel. I used blue tape to make marks. I mounted the strut extended to set the final position of the open door. making sure when compressed the door was closed.
I used a 20" 10 lb model which works great. I hardly notice any extra effort and the door stays nicely in place even with some wind.
See my picture in my prior post.
__________________
2007 Country Coach Tribute 260 Sequoia
40' DP w/Cat400, F494513, Lithium Battery & Solar
Live next to Yosemite
|
|
|
09-10-2019, 10:23 AM
|
#14
|
Senior Member
Join Date: Feb 2019
Location: Louisville, Kentucky
Posts: 434
|
Hi gpounder,
Would you please post a picture of the strut installed ?
Thanks,
Bob
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|