Quote:
Originally Posted by gmalmberg
The firmware update requires a usb port but the Axxera in my 36.3 doesn’t seem to have one. Is it hidden?
|
Yes it is. You'll need to pull your radio out to get to it because Thor did not expose it on the dash.
Remove radio faceplate via a small switch on top. Push it in. If you don't engage the switch you may break it.
Remove the trim piece. Use plastic trim tools at the top. It will slide up I think once it's free.
Use two butter knives on either side to push in the tabs holding the radio in. Gently pull the radio mostly out.
Fish around for a USB cable behind it.
There are videos and diagrams for all of this online. I can post later if you cant find them. I hope this helps.