I had the same problem with my bedroom slide. The outside rear bottom of the slide was low enough that the "slide trim" was hitting the "wall trim," (for lack of better term).
While redoing the floor I had to remove the bed platform working space and found there was no "vertical" slide adjustment. The mechanism slid on a fixed Teflon block, one for either side.
I made new block and inserted it into the frame, fileing and sanding until it "Fit".
H
__________________
'01 National RV Tropi-Cal, Ford V10, '01 Suzuki GV 4X4 Blue Ox Tow Bar,300 Watts Solar, 2500 Watt '458' Inverter, NO TVs, Most light fixtures upgraded to LEDs
|