Waxing and sealing outside

[keymastr]

I use this Starbrite marine polish with PTEF. Used it on my boats and it has so much UV inhibitor that the sun is not a problem. Bugs slide right off mostly with just the hose. Almost no scrubbing. It also is a Polymer and lasts almost a full year before needing redone.


https://www.amazon.com/Star-Brite-Pr...8BSH4YDZXE06CY

[Off Road]

Another fan of Rejex. Love how it makes the trailer look.

[Mark N.]

I've used nothing but Nu Finish in 30 years or so of RVing and car/truck waxing. I also removed the decals on my brand new 26RKS.

[Highway 4x4]

Originally Posted by Mark N.

I've used nothing but Nu Finish in 30 years or so of RVing and car/truck waxing. I also removed the decals on my brand new 26RKS.

Removing the decals voids all warranties,, lol.

[Mark N.]

Originally Posted by Highway 4x4

Removing the decals voids all warranties,, lol.

Yeah they probably won't be thrilled with me when I pull into a rally next June.

[Highway 4x4]

Just tell them they fell off.

[MtnHigh25rds]

So really interested in this product, my trailer is still relatively new and only used a couple times on short weekend camp outs. Would i need to prep the trailer in any other way besides a good wash before applying RejeX? Also is there a certain RejeX product to use and how much would i need for my 25RDS? ...I'm heading out Labor day weekend and want to show off the Outdoor RV ....Thanks all.

[IdahoBob]

Originally Posted by MtnHigh25rds

So really interested in this product, my trailer is still relatively new and only used a couple times on short weekend camp outs. Would i need to prep the trailer in any other way besides a good wash before applying RejeX? Also is there a certain RejeX product to use and how much would i need for my 25RDS? ...I'm heading out Labor day weekend and want to show off the Outdoor RV ....Thanks all.

A 16oz bottle of RejeX Polymer Sealant will probably do your rig twice. Before applying, a good wash with Dawn is probably a good idea. For washes after the sealant is applied, I use Rejex's ProWash.

For the best answers, contact the RejeX folks directly.

Bob

[Rickeoni]

When using dawn or any other strong soap, it is a good idea to use an oil and residue remover https://www.carpro-us.com/compounds/...-1-liter-34oz/ like this. You should also apply some silicone to the rubber seals after using Dawn, as it contains additives that dry out rubber.

[Lac]

Originally Posted by Rickeoni

When using dawn or any other strong soap, it is a good idea to use an oil and residue remover https://www.carpro-us.com/compounds/...-1-liter-34oz/ like this. You should also apply some silicone to the rubber seals after using Dawn, as it contains additives that dry out rubber.

I hear dry rubbers are not good....

Coops

[Highway 4x4]

take very good care of the rubber molding on the slides as they are not fun to replace.

[Lac]

Originally Posted by IdahoBob

A 16oz bottle of RejeX Polymer Sealant will probably do your rig twice. Before applying, a good wash with Dawn is probably a good idea. For washes after the sealant is applied, I use Rejex's ProWash.

For the best answers, contact the RejeX folks directly.

Bob

Who’s Dawn? Given my age a good wash with Dawn is a good idea...again given my age that’s all it is “an idea.”

Coops

[Stone Ranger]

When we had to replace the faded dark front cap on our Blackstone last year, Todd Morgan at the factory recommended Meguires Tech Wax 2.0 applied twice a year. This I have done, last fall and this spring. So far it is looking good.