Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Outdoors RV Owner's Forum
Click Here to Login
Register FilesVendors Registry Blogs FAQ Community Calendar Today's Posts Search Log in
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 08-24-2017, 04:35 PM   #1
Registered User
 
Join Date: Sep 2015
Posts: 2,007
What type screws for attaching solar panel?

I plan on attaching another solar panel in the near future.

Does anyone know what type of screws are used to attache Zamp solar panels to the roof?

Thanks
dexters is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 08-24-2017, 06:11 PM   #2
Senior Member
 
Rickeoni's Avatar
 
Outdoors RV Owners Club
Join Date: May 2012
Posts: 1,663
The ORV factory setup uses #8 x 1" screws.
__________________
2008 F450, 2016 Outdoors RV Glacier Peak 26 RKS
Rickeoni is offline   Reply With Quote
Old 08-24-2017, 07:06 PM   #3
Senior Member
 
Papa_Jim's Avatar
 
Outdoors RV Owners Club
Join Date: Oct 2009
Location: Manitoba,Canada
Posts: 2,789
I'm putting solar panels on my roof tomorrow.

On my trailer, underneath the rubber membrane, the roof sheeting is 3/8" plywood fastened to the wood rafters.

I'm planning to use #8 x 1" flat head wood screws to mount the solar panels. If I'm lucky enough to hit a rafter, I may decide to use a longer screw there.

Jim
__________________
2016 Creekside 23RKS
2012 Ram 2500 Laramie 4X4 Cummins 6.7L
Canada, eh?
Papa_Jim is offline   Reply With Quote
Old 08-24-2017, 07:10 PM   #4
Senior Member
 
Join Date: Mar 2017
Posts: 392
If your roof is not rubber .. 3m VHB tape . I have 4 panels on my roof with 4 points of attachment with the tape. 80mph for 400 miles .. holding very nice and the best part.. no holes
__________________
2002 Foretravel 36ft U325
2009 Jeep Wrangler
Davidrvr is offline   Reply With Quote
Old 08-24-2017, 07:20 PM   #5
Senior Member
 
MikeO58's Avatar
 
Join Date: Jul 2017
Posts: 434
Or maybe epoxy on some studs in location of tabs and use a nylok nut
__________________
Mike & Kelly
2017 Discovery 40E Freightliner Cummins 380hp
2017 Jeep Wrangler Unlimited
MikeO58 is offline   Reply With Quote
Old 08-24-2017, 08:08 PM   #6
Senior Member
 
Allen_C's Avatar
 
Join Date: Dec 2016
Location: Indianapolis
Posts: 160
Quote:
Originally Posted by Davidrvr View Post
If your roof is not rubber or pebble textured fiberglass.. 3m VHB tape . I have 4 panels on my roof with 4 points of attachment with the tape. 80mph for 400 miles .. holding very nice and the best part.. no holes
I fixed it for you
__________________
2016 Jayco Alante 31v
Allen_C is offline   Reply With Quote
Old 08-26-2017, 03:38 PM   #7
Registered User
 
Join Date: Sep 2015
Posts: 2,007
Thanks for the replies.
dexters is offline   Reply With Quote
Old 08-31-2017, 10:35 AM   #8
Member
 
Join Date: Feb 2017
Posts: 74
Quote:
Originally Posted by Allen_C View Post
I fixed it for you
How did that fix anything?

The real question here should be "do I have to put screws into the plywood sheeting, or can I adhere to the roof membrane".
totaldla is offline   Reply With Quote
Old 08-31-2017, 08:27 PM   #9
Senior Member
 
Papa_Jim's Avatar
 
Outdoors RV Owners Club
Join Date: Oct 2009
Location: Manitoba,Canada
Posts: 2,789
Quote:
Originally Posted by totaldla View Post
How did that fix anything?

The real question here should be "do I have to put screws into the plywood sheeting, or can I adhere to the roof membrane".
You cannot adhere to the roof membrane. It is only a thin sheet of rubber and it is not glued onto the plywood beneath it. You must put screws into the plywood sheeting. Make sure you use a generous amount of lap sealant as you work.

Jim
__________________
2016 Creekside 23RKS
2012 Ram 2500 Laramie 4X4 Cummins 6.7L
Canada, eh?
Papa_Jim is offline   Reply With Quote
Reply

Tags
panel, scr, solar, solar panel



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Attaching to walls, screws, hangers, etc kcmusa iRV2.com General Discussion 8 12-18-2015 02:01 PM
Attaching solar panels to roof. vernonadann Class A Motorhome Discussions 16 08-04-2015 05:25 PM
Solar panel without screws jerboy Class A Motorhome Discussions 17 05-12-2015 07:56 PM
Attaching a solar panel beeman12 Truck Camper Discussion 8 04-30-2015 08:36 PM
Adhesives or screws for solar panel mounting? vsheetz MH-General Discussions & Problems 10 12-16-2012 04:48 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 12:47 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.