Bobb.25,
I had a water leak in one of compartments and found it to be coming in through one of the sheet metal seams that make up the compartment. I pulled back the liner, removed the old sealant and re-applied new sealant then glued the liner back in place. Not sure if the door latches on your MH are adjustable. Mine are not however, I have seen a mod that I am going to do the entails the drilling, tapping and installation of an adjust screw that allows the doors to be pulled in tighter against the door seal. Hope this helps.
__________________
Martin Picke'
1998 Rexhall Anthem 34' DP, Cummins ISB, Allison 6 speed, Spartan Chassis, 300 watts solar.
|