Palomino Pop Up Lift Help Needed
I am helping my son with his 2007 Palomino 1500 pop up slide in camper. It uses a cable lift system with the cable mechanism mounted on the front of the camper. A nut worked loose on an end cover of the lift mechanism which allowed a bolt, that apparently retained the lift ratchet pall, to drop back into the lift housing and made the lift ratchet inoperable. We were successful in retrieving the bolt and restarting the nut but the pall did not engage. It appears the lift mechanism end cover needs to be removed to complete the repair. It appears removal of the end cover requires freeing of, at least, two cable guide tubes. Removal of the guide tubes appears to require dis-assembly of the cable attachments in the camper top which we are unwilling to start before getting more information. Help in guiding us through what we need to do will be greatly appreciated.
Larry (If you don't care where you are you ain't lost) 2010 Ram 3500 Cummins CC LB 4x4, 24 ft. Nomad fifth with slide, 9 ft. Elkhorn slide in, 2001 Starflyte by DynaMax 21 ft., V10.