Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > 5th Wheel Discussion
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 05-19-2016, 01:04 AM   #15
Senior Member
Join Date: Jan 2016
Posts: 294
Lowes had a terrible selection of PEX fittings. I went to a local OSH and they had a lot of stuff. What I ended doing on my install was to use a Sharkbite ball valve at the tube coming up out of the floor. I then put a 3"-4" piece of PEX there and then a 1/2" PEX to 1/2" thread Sharkbite adapter followed by a stainless 12" long flex hose with 1/2" fittings on both ends directly to the toilet. Worked very well and I now have a shut off in the event I develop a leak. I may build a small metal L bracket to support the ball valve at the floor from shaking around while on the road.
The 320 looks like a really nice head, can't wait to drop trou on it.

Bob1340 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-19-2016, 01:09 AM   #16
Senior Member
Join Date: Jan 2016
Posts: 294
BTW, I did a cursory inspection of my old Sealand head I removed. Not sure what model this was. It appeared to have 2 separate leaks, first was a hairline crack in the flush valve. That was fixable. I then found a crack in the bowl where it clamps to the base. You could see no cracks in the bowl inside the head, but you could from the outside. It was a ceramic bowl and plastic base.

Bob1340 is offline   Reply With Quote

ems, problems

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
foot stool jogger0604 Tiffin Motorhomes Owners Forum 2 09-30-2012 06:48 PM
Leaking 12V Aria stool contrarymary Newmar Owner's Forum 2 01-11-2012 08:03 PM
Barrel chair or a Euro Chair with foot stool ct78barnes Winnebago Industries Owner's Forum 12 03-19-2011 07:20 AM
Anybody Lose a white Kitchen Stool ? allendp Texas Boomers 4 12-17-2009 02:19 PM
My Stool is Leaking! BusterPSD 5th Wheel Discussion 9 10-07-2005 03:29 PM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 05:07 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.