Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > 5th Wheel Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 06-13-2014, 12:39 PM   #1
Senior Member
Join Date: Jul 2010
Posts: 169
Belly Pan

I have a 2012 Keystone / Montana. What is the best way to reseal the belly pan if you have to open it up ?

Chris and Carole Christian / ccfromfl@gmail.com
2011 Tiffin Phaeton / 2012 Ford Fiesta "Tow'd"
"Our Cause Was Just"
CCFROMFL is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 06-13-2014, 12:54 PM   #2
Senior Member
go4dsnow's Avatar
Join Date: Jan 2011
Location: Castle Rock
Posts: 229
If you only had to make a small opening then the best way is to cut a piece of plywood the same size and place it on top of the belly pan and then use sheet rock screws with fender washers and drill them in thru the material up into the plywood. then get some black Gorilla tape from Lowes and cover it. works and looks great.

go4dsnow is offline   Reply With Quote
Old 06-13-2014, 01:51 PM   #3
Senior Member
Walt Bennett's Avatar
Mid Atlantic Campers
Join Date: Sep 2012
Posts: 306
One thing I did was to replace the lame aluminum strips with U channel from Lowe's (used the old strips to drill holes in the same places). Supports it a whole lot better.
2010 Montana 3665RE, wet bolts, etc.
2006 Ford F350 Diesel Dually, air bags, Softopper, Aeroshild, etc.
Walt Bennett is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
2100MH Fluid Change - Shallow or Standard Pan vettenuts Allison Transmission Forum 2 06-04-2014 05:11 AM
Anyone installed a Derale Transmission Cooling pan on thier Rig? Rockyroad Ford Motorhome Chassis Forum 3 06-01-2014 07:55 PM
Cracked Oil Pan B5.9 Piker Cummins Engines 23 03-29-2014 08:24 PM
1999 Cummins ISB 24V oil pan gasket change Bad Bolt Cummins Engines 8 02-24-2014 08:39 AM
Trans seeping around pan gasket plus? Roll Ford Motorhome Chassis Forum 20 08-18-2013 05:36 PM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 08:40 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.